Cut Sheet
Table Of Contents
Applications
• Serve as pulling ttings.
• Make bends in conduit system.
• Provide openings for splicing.
• Connect and change direction of conduit runs.
• Allow connections for branch runs.
• Permit access to conductors for maintenance.
Features
• Roomy interiors: more wiring space.
• Smooth, rounded integral bushings in hubs protect conductor
insulation.
• Accurately tapped, tapered threads for tight, rigid joints and
excellent ground continuity.
• Form 85 copperfree aluminum Unilets are lightweight, self-
oxidizing, self-renewing and offer a high corrosion resistance.
• Lightweight aluminum facilitates shipping, handling and
installing.
• Sizes with at-back design ideal where tting is mounted at
against surface.
• 1/2" to 3" blank covers are domed for extra wiring space.
Standard Materials
• Bodies: copperfree (max. 4/10 of 1%) aluminum
— 1/2” thru 2”: pressure cast
— 2-1/2” thru 4”: sand cast
• Blank covers: malleable iron, steel or aluminum
• Cover screws: stainless steel
• Gaskets: neoprene or composition ber
Standard Finishes
• Aluminum bodies: epoxy powder coat
• Stamped aluminum covers: natural nish
• Cast aluminum covers: epoxy powder coat
Certifications and Compliances
• UL Standards: 514A, 514B
• UL Listed: E2527
• CSA Standard: C22.2 No. 18.3
• CSA Certied: 065183
• NEMA Standard: FB-1
Options
• PVC coating available on all threaded bodies and select covers.
Add sufx -PVC to catalog number.
• For fully assembled body, cover and gasket, add sufx -ACGA.
Related Products
• For explosionproof conduit outlet bodies and boxes, see
Enclosures and Junction Boxes.
Conduit Body with Stamped Aluminum Cover. 2” Type C shown.
Typical Form 85 Conduit Bodies with Setscrews.
For use with Electrical Metallic Tubing (EMT).
Fittings
Fittings: Conduit Bodies
Visit our website at www.appletonelec.com or contact us at (800) 621-1506.
© September 2010
26
Form 85
™
Unilet
®
Conduit Outlet Bodies
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.