Cut Sheet

Class I, Division 1 and 2 Groups B, C, D
Class II, Division 1 and 2 Groups E, F, G
Class III
Trade
Size
(Inches)
Inches/C
entimeters
Kwiko
®
A
Cement
Required
Ounces/Grams
Catalog Number
‡
A (Length) B (Width)
Turning Radius
†
Malleable Iron Almag 35 Aluminum
EYDM Vertical Conduit Drain Seals for Close Turning Radius (25% fill)
‡
Male/Female (Removable Male Nipple)
1/2" — 1"
1/2 3.63/9.2 1.38/3.5 1.94/4.9 2.00/56.7
EYDM-50

EYDM-50AL
3/4 3.63/9.2 1.38/3.5 1.94/4.9 2.00/56.7
EYDM-75

EYDM-75AL
1 4.06/10.3 1.56/4.0 2.06/5.2 3.00/85.1
EYDM-100

EYDM-100AL
1-1/4 4.94/12.5 2.00/5.1 1.75/4.5 7.00/198.4
EYDM-125

EYDM-125AL
1-1/2 5.50/14.0 2.38/6.0 2.06/5.2 13.00/368.5
EYDM-150

EYDM-150AL
2 6.13/15.6 2.88/7.3 2.31/5.9 22.00/623.7
EYDM-200

EYDM-200AL
1-1/4" — 3"
2-1/2 7.50/19.1 3.38/8.6 2.69/6.8 36.00/1020.6
EYDM-250

EYDM-250AL
3 8.13/20.6 4.13/10.5 3.13/7.9 61.00/1729.3
EYDM-300

EYDM-300AL
3-1/2 8.94/22.7 4.75/12.1 3.44/8.7 89.00/2523.1
EYDM-350

EYDM-350AL
3-1/2" — 4"
4 9.38/23.8 5.13/13.0 3.69/9.4 114.00/3231.8
EYDM-400

EYDM-400AL
EYDM
1/2" — 1"
EYDM
1-1/4" — 4"
* Per NEC 501.15(C)(6), seals in Class I, Division 1 and 2 must be limited to conductor fill of 25% of cross sectional area of a rigid metal conduit of the same trade
size unless approved for higher percentage fill. See 40% fill sealing fittings.
† Turning radius with cover or plug removed.
‡ PVC coating available on select sealing fittings. Add suffix -PVC to catalog number.
 Indicated items in the shaded area which are UL Listed for Class I, Groups B, C, D; Class II, Groups E, F, G; and Class III.
Fittings
Fittings: Hazardous sealing Fittings
Visit our website at www.appletonelec.com or contact us at [phone].
© September 2010
185
EYDM 25% * Fill Vertical Conduit Drain Sealing Fittings for Close Turning Radius
Explosionproof, Dust-Ignitionproof, Raintight
UNILETS
®
for Use with Threaded Rigid Metal Conduit and IMC.