Technical data

AR2010 USB Stick Synthesizer USB Programming Manual
2. FREQuency Subsystem
Table 3.2: FREQuency subsystem Commands Summary
Command Page Description
FREQuency:LOCK 16 Returns the lock status of the device.
FREQuency:REFerence:EXTernal 19 Sets or Returns whether the internal or external sup-
plied reference oscillator is used.
FREQuency:SET 20 Sets or Returns the desired tuning frequency fre-
quency in GHz.
3. POWER Subsystem
Table 3.3: POWER subsystem Commands Summary
Command Page Description
POWEr:RF 22 Turns on or off the RF output of the device.
POWEr:SET 23 Sets or returns the output power of the device.
4. SYSTem Subsystem
Table 3.4: SYSTem subsystem Commands Summary
Command Page Description
SYSTem:CLeaRMemory 25 Clears the contents of the specified memory location.
SYSTem:ERRor 26 Returns the contents of the error queue of the device.
SYSTem:MODelNUMber 32 Returns the model number of the device.
SYSTem:PRESet 33 Returns the device to its initial power-up state.
SYSTem:READSTRing 35 Reads a string from the device.
SYSTem:SENDSTRing 38 Sends a string to the device.
SYSTem:SERialNUMber 39 Returns the serial number of the device.
SYSTem:STATus 40 Returns the status of the device.
SYSTem:VERSion 41 Returns the version of SCPI used by the device.
Applied Radar, Inc. Revision 1.0.0 14