Technical data

AR2010 USB Stick Synthesizer USB Programming Manual

4. SYSTem:LOAD [0-9]

This command loads the settings from the speciﬁed memory location. There are 10 memory locations,

with location 0 being the default location which is restored upon power-on or reset. For a detailed de-

scription of the parameters saved, see your product’s Operation Manual.

Syntax

SYST :LOAD Space 0-9

There are 10 memory locations, numbered 0 through 9. Memory location 0 is a special memory location

as the default conditions are loaded from this memory location on power-up or reset.

Example

SYST:LOAD 3 This command loads the settings from memory location 3

Applied Radar, Inc. Revision 1.0.0 31