Technical data

AR2010 USB Stick Synthesizer USB Programming Manual
10. SYSTem:SAVE [0-9]
This command saves the current setup to memory. There are 10 memory locations, with location 0 being
the default location which is restored upon power-on or reset. For a detailed description of the parameters
saved, see your product’s Operation Manual.
Syntax
SYST :SAVE Space 0-9
There are 10 memory locations, numbered 0 through 9. Memory location 0 is a special memory location
as the default conditions are loaded from this memory location on power-up or reset.
Example
SYST:SAVE 3 This command saves the current state to memory location 3
Applied Radar, Inc. Revision 1.0.0 37