Technical data

USB Stick Synthesizer IEEE 488.2 Command Reference
16. USBTMC/USB488 Universal Commands
DCL
The DCL (Device CLear) command causes all USB instruments to assume a cleared condition. The
definition of Device Clear is unique for each instrument. For the AR2010 USB Stick Synthesizer:
∙ All pending operations are halted
∙ The parser (the software that interprets the programming codes) is reset and is waiting for the first
character of a programming code.
∙ The output buffer is cleared.
∙ The ARI expansion bus is scanned for attached modules. Any modules found on the ARI expansion
bus are identified.
Applied Radar, Inc. Revision 1.0.0 59