User manual

AR2010 USB Stick Synthesizer User Manual
8. SYSTem:OVERTEMPerature?
This command returns the over-temperature status of the AR2010. During normal operation, the return
value will be 0. If an over-temperature condition is observed, an error message will be pushed into the
error queue (accessible through SYSTem:ERRor) and the return value will be 1 if the temperature ex-
ceeded the user defined threshold, or 0 if it exceeded the factory defined saftey threshold.
NOTICE
The SYST:OVERTEMP command is only available on AR2010-5-10 v3.0.1 and higher RF Synthesizer
modules.
Syntax
SYST :OVERTEMP ?
Query Example
SYST:OVERTEMP? This query returns the over-temperature flag value from the USB Stick Synthe-
sizer.
Applied Radar, Inc. Revision 2.0.1 39