User manual

AR2010 USB Stick Synthesizer User Manual

10. SYSTem:SAVESTATE [1-5]

This command saves the current setup to non-volatile memory. There are 5 re-writeable memory loca-

tions, speciﬁed by choosing an index between 1 and 5. Any of the 5 states can be restored on startup

when speciﬁed with the SYSTem:BOOTSTATE command. The parameters saved are the PLL mode, fre-

quency, reference divider, reference internal/external, reference frequency, max/min power setting, output

power, RF power (on AR2010-4400 models only).. For a detailed description of the parameters saved,

see your product’s Operation Manual.

Syntax

SYST :SAVESTATE Space 1-5

There are 5 memory locations, numbered 1 through 5. Memory location 0 contains the factory default

settings and is write-protected.

Example

SYST:SAVESTATE 3 This command saves the current state to memory location 3

Applied Radar, Inc. Revision 2.0.1 41