User manual

AR2010 USB Stick Synthesizer User Manual

11. SYSTem:LOADSTATE [0-5]

This command restores a previously saved state from non-volatile memory. In addition to factory default

state 0, there are 5 re-writeable memory locations, speciﬁed by choosing an index between 1 and 5. The

restored parameters are the PLL mode, frequency, reference divider, reference internal/external, refer-

ence frequency, max/min power setting, output power, RF power (on AR2010-4400 models only).. When

the LOADSTATE command is called, these parameters will be applied to the device.

Syntax

SYST :LOADSTATE Space 0-5

There are 6 memory locations, numbered 0 through 5. Memory location 0 contains the factory default

settings, while locations 1-5 are user re-writeable using SYSTem:SAVESTATE.

Example

SYST:LOADSTATE 4 This command loads the state 4 parameters from non-volatile memory and ap-

plies them to the device.

Applied Radar, Inc. Revision 2.0.1 42