WÁ jß ÀÔ}}jaája ÔÃMÊÃÌÀ?}jÊajÚWj U ser M anual The Leader in Personal Storage
Copyright © Apricorn, Inc. 2007. All rights reserved. Windows® and MS-DOS® are registered trademarks of Microsoft Corp. Microdrive® is a registered trademark of IBM Corp/Hitachi Global Storage. Cryptainer® is a trademark of Cypherix. Second Copy 2000® is a trademark of Centered Systems. All other trademarks and copyrights referred to are the property of their respective owners.
Table of Contents Page # 1. Introduction ............................................................. 2 2. Getting to know your MicroKey .............................. 3 • System Requirements ................................. 3 • Package Contents ....................................... 3 • Product Specifications ................................. 4 3. Set-Up .................................................................... 5 • USB Installation ..............................
1. Introduction Thank you for the purchase of your new USB MicroKey. Please take a few moments to read this manual and familiarize yourself with the MicroKey and all of the software programs that come with it. The MicroKey is a tiny USB 2.0 disk drive, housed inside a protective aluminum shell. It was engineered to be simple, small and fast, and it’s unique design sets a new standard for mobile storage. The MicroKey stores its data on tiny 1” Hard Drive, with up to 8GB of data storage.
2 Getting to know your MicroKey A. System Requirements Hardware and Software requreiments: - Pentium CPU (recommended) - 128MBs RAM (recommended) - USB Port (MicroKey supports USB 2.0, but will work on USB 1.1 ports at slower speeds - CD ROM drive Operating systems supported: Microsoft: Windows 2000 Windows XP Apple: Mac OS 9.x (supports USB 1.1 mode only) Mac OS X 10.x B.
C. Product Specifications Data Transfer Rates: USB 2.0 Hi-Speed Device; up to 480Mbps Power Supply: Bus power only (+5V from standard USB connector, no external power cable required) Bus Interface: USB 2.0 (Mass storage class device ) Disk Interface: IDE (UDMA mode 2) Buffer Size: 128KB RPM: 3600 Average Seek Time: 12ms Sustained IDE data rate: up to 9.
3. Set-Up A. USB Installation The MicroKey uses a standard USB “type A” connector, and can connect to any USB1.1 or USB 2.0 port on your computer. 1) Locate a USB port on your Laptop or Desktop computer. 2) Insert the MicroKey into the USB port. 3) Wait a few moments for the OS to install device drivers. 53 " 53 " fig 1) USB port installation 4) The LED on the MicroKey will come on once the drivers are installed and the Microdrive is connected to your computer.
B. Special Features Swivel Head Connector fig 3) USB swivel connector The MicroKey also has a special “swivel head” built into the USB connector, which can flex up to 90 degrees in either direction. If space between USB ports is tight, rotate the swivel head so you can connect the MicroKey without removing other USB devices. Soft Carrying Case When not in use, store the MicroKey in it’s soft carrying case.
C. Windows 2000 / Windows XP Installation Once installed correctly in the USB port, Windows will automatically detect the MicroKey and initialize the drive. The MicroKey operates as a standard “Mass Storage Class” USB device, and uses device drivers already included in the operating system. When properly installed, the installation is completely automatic and no additional device driver files are required. This process should only take a few seconds.
E. Disconnecting the MicroKey Windows 2000 and XP 1. Locate the system tray on your Windows Desktop (the system tray is the part of the taskbar that displays the date and time). 2. Click on the “Safely Remove Hardware” icon in the system tray. 3. Follow the instructions to remove the device from your computer. fig 5) Safely Remove Hardware Icon NOTE: To protect against unexpected data loss, Windows checks that all files on the disk are closed before allowing the USB device to be removed.
4. Software The MicroKey includes 2 additional programs on the support CD-ROM: Cryptainer is a file-encryption program that is useful for protecting personal data. Use this software to protect sensitive files or personal information stored on your MicroKey. Second Copy is a backup program that makes compressed images of important files and saves them to a removable disk. Use this software if you want to use your MicroKey as a backup media for important laptop or desktop files.
DOS. Cryptainer runs on most 32-bit versions of MS Windows (95/98/ ME/2000/XP/2003 Server) as a special Windows device driver operating on an implementation of the Blowfish algorithm in Cipher Block Chaining (CBC) mode with a block size of 64 bytes and conforms to international standards (please see the Cryptainer help file for more information). Installing Cryptainer 1. Insert the Cryptainer/Second Copy CD into your CD-ROM drive. 2. Setup screen will pop up.
checking the box in the Setup Window (fig 7). If you choose not to run Cryptainer immediately, you can always click the Start button and go to Programs >> Cryptainer >> Cryptainer, or by double-clicking the Cryptainer Icon on your desktop. fig 7) Cryptainer install 5. To learn more about how to use Cryptainer, look for the built in help file. From the Cryptainer Main Menu Bar, click on Help >> Help Topics (see fig 8).
fig 8) Cryptainer help file B. Second Copy 2000 Backup Software Second Copy 2000 lets you back up your important data files from your computer’s hard drive to the MicroKey (or any other location you select). Once you create an archive, Second Copy 2000 updates your backup archive automatically so that your backups are always current. Once installed, Second Copy can be configured to run in the background and copy files at predefined intervals.
fig 9) Second Copy 2000 installer 3. Click “next” and follow the on screen instructions to install the program. (see fig 9). 4. Upon completion of installation, you can immediately run Second Copy by checking the box in the Setup Window (see fig 10). If you choose not to run Second Copy immediately, you can always click the Start button and go to Programs >> Second Copy 2000 >> Second Copy 2000.
5. To learn more about how to use Second Copy, Look for the built-in Help file. From the Second Copy Main Menu Bar, click on Help >> Help Topics. (see fig 11).
5. Troubleshooting & FAQs Frequently Asked Questions: Q: “Where are the device drivers on the CD-ROM?” A: The MicroKey is designed to operate as a USB “Mass Storage Class” device, and it uses generic device drivers already installed as part of the Operating System. When installed properly, NO ADDITIONAL DEVICE DRIVERS ARE REQUIRED. Q: “What’s the difference between USB and USB 2.0?” A: USB 2.0 is much faster. Older USB 1.1 devices transfer data at about 12 Megabits/sec. Newer USB 2.
Troubleshooting Common Errors Error: Solution: MicroKey is not detected by the system when connected to through a USB hub. Although the MicroKey is designed to operate as a bus-powered device, the MicroKey cannot initialize on non-powered or low-powered USB hubs. Check that the hub has proper power or try connecting through a fully powered USB hub. Error: Solution: The LED is on, but the MicroKey is not detected by the OS.
5. Technical Support A. Contact Information Apricorn provides the following helpful support resources: 1. Software help files and FAQs sections of the User’s Guide. 2. Web site: http://www.apricorn.com 3. E-mail: support@apricorn.com. 4. Telephone: 1-800-458-5448. Apricorn’s Technical Support Specialists are available from 8:00 a.m. to 5:00 p.m., Pacific Standard Time from Monday to Friday. B.
Warranty Conditions One-Year Warranty: Apricorn offers a 1-year warranty on all MicroKey products against defects in materials and workmanship under normal use. The warranty period is effective from the date of purchase, either directly from Apricorn or from an authorized reseller. Disclaimer and terms of the warranties: The warranty becomes effective on the date of purchase and must be verified with your sales receipt or invoice displaying the date of product purchase.
Notes: Pg 19
MicroKey User Guide v2.0 12191 Kirkham Road Poway, CA, U.S.A.
