Assembly date filter: w2037 (2020-09-07). Variant filter on: TYPE-FH,STWPOS-L,CRUISEC,HWSS-ACB,AUDIO,CO-USB,COD-BRA,COD-NS. Project filter: No Filter. TABLE OF CONTENTS 01 Infotainment Overview............................................. 2 PHONE............................................... 5 MEDIA................................................. 9 Specifications....................................
01 Infotainment
Overview of the infotainment system The infotainment system includes for example the truck's audio system and Bluetooth® connectivity. 1 Display 2 USB port 3 Control panel 4 Steering wheel keypads 5 Microphone WARNING Do not use the infotainment system in such a way that it interferes with safe and attentive operation of the truck. When driving, keep your attention to the road. Infotainment tasks that require your attention should be done when the truck is stationary.
Controlling the infotainment system 4 Down. Navigate down in the display. 5 OK. Select a highlighted item. You can use the following controls to control the functions in the infotainment system: 6 Home. Return to the display's home screen. 7 Menu. Open the main menu. • The steering wheel keypads 8 Push to talk. Activate voice control. The control panel 9 Accept. Open the app PHONE or answer an incoming call. • Some functions can be controlled only by the steering wheel keypad.
Control panel 1 Volume. Turn to adjust the volume. 2 On/off. When in function mode Living, press On/off to start the infotainment system and long-press to turn it off. When listening to radio or media files, press On/off to mute or unmute. 3 Media. Open the app MEDIA. 4 Phone. Open the app PHONE. 5 Vehicle. Open the app VEHICLE. 6 Camera. Open the app CAMERA. 7 Preset 1 to 4. When you listen to FM radio, press and hold one of the keys 1 to 4 to store the current station as a preset station.
Assembly date filter: w2037 (2020-09-07). Variant filter on: TYPE-FH,STWPOS-L,CRUISEC,HWSS-ACB,AUDIO,CO-USB,COD-BRA,COD-NS. Project filter: No Filter.
A short introduction to Phone When a mobile phone or other device with a SIM card is connected to the truck by Bluetooth®, the infotainment system in the truck works as a handsfree for the connected device. The audio is routed via the truck's loudspeakers and a microphone is fitted in the panel above the windscreen on the driver's side. Opening Phone To open the app PHONE, do any of the following: • Press the Accept key in the steering wheel keypad. • Press the Phone key in the control panel.
Changing what a device is used for A device that is used for media can be set to be used for both phone and media instead. The device that is used for phone will then be be disconnected. To change the use of a device from media to phone and media, do as follows: 1 Go the list of connected devices in the top of the Options menu. 2 Select the device that is used for media. 3 Select Phone + Media.
Type in the phone number, using the keypad. If you need a plus sign, highlight 0+ and long-press OK. When you have entered the number, select Call in the display or press the Accept key in the steering wheel keypad to make the call. Rejecting the call To reject the call, do any of the following: • Press the End/Reject key in the steering wheel keypad. • Select Reject in the display. Bluetooth Settings The Call icon in the display.
Assembly date filter: w2037 (2020-09-07). Variant filter on: TYPE-FH,STWPOS-L,CRUISEC,HWSS-ACB,AUDIO,CO-USB,COD-BRA,COD-NS. Project filter: No Filter.
A short introduction to Media Selecting a source Listening to radio Switching between stations Opening Media If you want to change source, press the down key in the steering wheel keypad to open the Sources menu. Any current source is marked with "Active". Select the source you want from the list. In Media, you can for example listen to radio or listen to music from a connected device. Devices can be connected to the infotainment system through Bluetooth® or USB.
confirms that the radio station is saved and you can release the key. Settings Any station that is already saved to the "Preset" key that you press will be overwritten. • Manage the settings for the RDS functions. • Adjust the speed dependent volume. • Make a factory reset. In the Settings menu you can do the following: Alternative Frequency The frequency range for FM stations is fairly limited. For this reason, many stations broadcast on alternative frequencies in different areas.
Listening from a Bluetooth device When you select Bluetooth as source, you can listen to streamed media or media files that are stored on the selected device. ® Play/Pause Listening from a USB device When you select USB as source, see Selecting a source page 10, you can listen to media files that are stored on the selected device. Artist When you select a media file, it starts playing. Play/Pause Start playing media on the device.
Audio settings In Audio Settings you can change the settings for audio. When a setting's row is highlighted, press the Right or the Left key in the steering wheel keypad to adjust the setting. Infotainment 01 Assembly date filter: w2037 (2020-09-07). Variant filter on: TYPE-FH,STWPOS-L,CRUISEC,HWSS-ACB,AUDIO,CO-USB,COD-BRA,COD-NS. Project filter: No Filter. MEDIA The setting is autmatically saved when you move the highlight to the next row.
14 Infotainment 01 X REM_draft_2019-06-10 Assembly date filter: w2037 (2020-09-07). Variant filter on: TYPE-FH,STWPOS-L,CRUISEC,HWSS-ACB,AUDIO,CO-USB,COD-BRA,COD-NS. Project filter: No Filter.
Frequency bands and output power Application AM Frequency 153-279 kHz, 522-1611 kHz FM 87.5-108 MHz DAB 174.928-239.200 MHz Bluetooth 2402-2480 MHz Simplified EU declaration of conformity, radio Hereby, Aptiv Services Deutschland GmbH, 42367 Wuppertal, declares that the radio equipment type automotive headunit Radio and Entertainment Module is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https:// www.
FCC FCC ID: LTQVTREM2 FCC § 15.19 Labelling requirements This device complies with part 15 of the FCC Rules and Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. FCC § 15.
Assembly date filter: w2037 (2020-09-07). Variant filter on: TYPE-FH,STWPOS-L,CRUISEC,HWSS-ACB,AUDIO,CO-USB,COD-BRA,COD-NS. Project filter: No Filter. INDEX A Alternative frequency, AF ................... 11 AM radio ............................................. 10 Audio settings ..................................... 13 B Bluetooth specifications ..................... 15 Bluetooth, connecting a device ............ 6 Bluetooth, listen to media ................... 12 Bluetooth, settings ....................
*CID0123456* *CID0123456*
