Specifications

PHONE
A short introduction to Phone
When a mobile phone or other device
with a SIM card is connected to the truck
by Bluetooth
®
, the infotainment system in
the truck works as a handsfree for the
connected device. The audio is routed
via the truck's loudspeakers and a
microphone is fitted in the panel above
the windscreen on the driver's side.
Opening Phone
To open the app PHONE, do any of the
following:
• Press the Accept key in the steering
wheel keypad.
• Press the Phone key in the control
panel.
Connecting your mobile phone
PHONE works only when a device with a
SIM card is connected to the truck by
Bluetooth
®
. If you open PHONE with no
device connected, you must first connect
a device.
You can have up to two devices
connected, but only one at a time can be
used for phone.
1 Make sure that the device you want
to connect has Bluetooth
®
on and
that it is discoverable.
2 Select Yes. The truck searches for
available Bluetooth
®
devices.
3 Select the device from the list of
available Bluetooth
®
devices.
4 Check that the number in the display
and the number shown on the device
matches. If they do, accept the
paring on the device.
If the infotainment system has paired
devices saved, you can connect a device
in two ways. You can either search for
available Bluetooth
®
devices or you can
connect a previously paired device from
the device history. Press the Down key
to open the Options menu and select
Search for Devices or Paired Devices.
If you select Search for Devices, do as
follows to connect a device:
1 Make sure that the device you want
to connect has Bluetooth
®
on and
that it is discoverable.
2 Select the device from the list of
available Bluetooth
®
devices.
3 Check that the number in the display
and the number shown on the device
matches. If they do, accept the
paring on the device.
If you select Paired Devices, do as
follows to connect a device:
1 Make sure that the device you want
to connect has Bluetooth
®
on.
2 Select the device from the list of
paired Bluetooth
®
devices.
3 Select Connect.
The first device you connect will
automatically be used for both phone
and media.
If you want to connect a second device,
select Search for Devices or Paired
Devices again. When you connect the
second device, you choose if the second
device should be used for media only or
for phone and media.
If you select Media, the first connected
device will be used for phone only. If you
select Phone + Media, the first
connected device will be disconnected.
01
Infotainment
6
Assembly date filter: w2037 (2020-09-07). Variant filter on: TYPE-FH,STWPOS-L,CRUISEC,HWSS-ACB,AUDIO,CO-USB,COD-BRA,COD-NS. Project
filter: No Filter.
X REM_draft_2019-06-10