FAQ
● What comes with the spa? What else is needed?
Each spa comes with a locking thermal cover and inial filter. Plug and Play spas include
a 15 GFCI cord. Spas requiring 240v electrical configuraon will require a GFCI,
conduit, and wires - which should all be supplied and installed by a licensed electrician.
Steps, chemicals, and replacement filters are not included with the spa unless otherwise
specified.
● Does the spa come with an Ozonator?
Most AquaLife Spas come with an Ozonator – check individual spa specificaons for details. All
spas are Ozone-Ready, so even if the spa does not have an Ozonator included, it can be
purchased and installed.
● What does an Ozonator do?
An Ozonator produces ozone that is then injected into the spa water. The ozone removes
contaminants such as loons, detergents, and organic waste from the water through the
process of oxidaon, thus improving the water quality. An Ozonator reduces the amount of
chemicals needed versus a spa without an ozonator.
● How much does the cover weigh?
The weight of the cover will vary depending on the size, but on average it weighs about 21
lbs.
Cover liers are available for purchase, which ease the burden of taking the cover on and off
(and helps protect the cover by holding it off the ground when not in use).
● On average, how much will it cost to operate the spa?
Actual operang cost will vary depending on individual usage, ambient temperature and local
ulity rates. However, on average, AquaLife spas cost between $15 - $30 per month to
operate. Full foam insulaon, a thermal locking cover and programmable filter cycles make
this spa extremely energy efficient. It meets all energy consumpon guidelines as set forth by
the California Energy Commission (CEC).
● Does the shipping price include delivery to my backyard or posioning of the spa?
No. The spa is only delivered to the curbside in front of the driveway. Generally, two men
with a furniture dolly can move the spa to the desired locaon. Check your local service
directory to find a moving service or contractor to assist moving the spa, if needed.
● What type of foundaon is required for the spa?
The spa requires support of at least 80 lbs. per square foot, whether it be a deck or on the
ground. If installed on the ground, the foundaon can be a concrete slab 4 inches thick,