FAQ
● What are the delivery size requirements?
The hot tub will be delivered on its side and will need at least 36” of clearance when
fing through doors.
● How many was does the Plug and Play spa use?
The Plug and Play spa is 120 volts, and draws 15 amps. This converts to 1,800 was.
● What type of chemicals are needed for this spa?
Maintaining hot tub water typically consists of 4 simple steps. However, please follow the
instrucons on the spa maintenance care kit you chose.
o Balance your water using pH Up or Down
o Establish proper alkalinity levels using Alkalinity Increaser or Decreaser
o Determine calcium hardness
o Sanize the water using Chlorine or Bromine.
● Can the hot tub sit empty during winter in snowy climates?
Yes. You can follow instrucons in your owner’s manual for “winterizing” the spa. However,
winterizing the spa is not necessary; AquaLife Spas are designed to run in cold climates and
year round.
● Can you turn off the waterfall feature?
Yes, if your spa comes with a waterfall, it can be adjusted or turned off enrely.
● Is it noisy when the pump/heater is operang?
While they are detectable, spa pumps running do not interfere with your relaxaon and
enjoyment of your spa experience.
● Can the jets be turned off and on?
Yes, jets can be turned off and on at the face of the jet itself.
*110/115/120 volts are oen used interchangeably for normal residenal outlets; likewise,
220/230/240 volts are used interchangeably, as they are 2x a normal residenal outlet.