Installation Guide

INSTALLATION INSTRUCTIONS

2. Install Floor Bolts

1. Remove Existing Bolts & Wax

NOTE:

with bolt heads down and threaded ends facing up. (Bolts

If this installation replaces an old toilet, ensure the flange is above

floor level. With a putty knife (not included), gently remove old wax

from the top of the flange.

should be parallel to wall and 6 in. apart). Then, place plastic

while installing toilet.

Floor

Flange

3. Install Wax Ring

Turn toilet bowl (A) upside down onto a cushioned surface.

Place wax ring (NN) over the raised outlet ring of the bowl.

adheres to the bowl.

NOTE:

4. Position Bowl on Floor Flange

(AA) protruding up through the holes in the base of the bowl.

NOTE: Keep the bowl level as it is lowered onto the

ange. You may need a second person to help

lift the bowl.

Once bowl is in position, press down with a slight twisting

motion on the top center of the bowl, eventually applying

full body weight to evenly compress the wax ring to create a

watertight seal. Make sure the bowl is as level as possible.

CAUTION: Do not rock the bowl back and forth as

this may break the seal.

TIP: It may be necessary to use small wedges

(shims) under the edge of the bowl due to slight

not wobble or rock.

Floor

Flange