Issue Date: 24/12/2019 WIRELESS BLUETOOTH CONVERTER SKBLE-1927 CONTENTS 1. Overview and features Page 2. 2. Diagrams Page 3. 3. Application Control Page 4. 4. Pairing / Un-pairing device Page 5. 5. Specifications 6. Warning Page 19.
Issue Date: 24/12/2019 1. Overview and features Compact wireless battery operated BLE converter enables you to control from any Smartphone / tablets via Bluetooth and converts into 433Mhz RF to control Home Automation System. Simple App set up to manage up to 8 rooms, with 8 individual devices per room, create 8 events, sharing configurations to unlimited Smartphone and control unlimited Skybridge converter within one app. Main features; • • • • • • • • • Free standing on table BLE 5.0 & 433MHz 1.
Issue Date: 24/12/2019 2.
Issue Date: 24/12/2019 3. Application Control App Name: Sky Bridge Free app download. Available in Apple App Store or Google Play. No registration needed. No annual fees. App Control Bluetooth ⚫ ⚫ Please ensure Bluetooth is enabled from your Smartphone setting. Only one Smartphone can control one Skybridge converter at one time. Launch App 1. Allow Bluetooth to connect to and control devices. 2. Press “Scan” to search for surrounding Skybridge device and select the smallest -DB number.
Issue Date: 24/12/2019 3. First time connect, the app needs to link with the Skybridge device. During linking process, the red LED on Skybridge device will flash until you press the “Link” button or within the 13 seconds limitation.
Issue Date: 24/12/2019 Pairing / Unpairing Receiver Device Pairing Select ‘Lighting’ to start pairing device. 1. Select a room.
Issue Date: 24/12/2019 2. Press the + button to pair device. 3. Select the device type. (Fireplace, Space Heater, Lamp) 4. Enter ‘pairing mode’ on receiver device and press the “Confirm” button to confirm pairing. 5. Once paired, receiver device will appear in the list.
Issue Date: 24/12/2019 Unpairing 1. Select the device that you wish to unpair. 2. Press the ‘unpair’ button and press ‘confirm’.
Issue Date: 24/12/2019 Control Receiver Device 1. To control individual device, select the device and press I to turn ON or O to turn OFF. 2. Rename Room or Device. By pressing the ‘pen’ mark you can rename all rooms and devices.
Issue Date: 24/12/2019 3. You may control all the device in that room as ‘All On – All Off’ by pressing the light bulb icon. Yellow stands for All On. Grey stands for All Off.
Issue Date: 24/12/2019 Event Setup In this page, you can create up to 8 timers. Each event can store up to 7 devices with All Off built-in slot at the end. 1. Select an event slot to create an event. 2. Press the + button to add device.
Issue Date: 24/12/2019 3. From the device list, select the device you wish the event to include. 4. After device are added, the very last slot is the default ‘ALL OFF’ command. 5. Each device can set timer interval delays. 6. Once done, select from the 3-event action. Immediate – single timer. (once only event) Scheduled – single timer, set the start day & time.
Issue Date: 24/12/2019 Cycle - repeat timer, set day(s) & start time. (For your information, the app is written this way. Once user presses “SAVE” button, it only sends the setting command packet to Skybridge device. Then if user presses the activate / deactivate button (the play button) the app then send the command to start or stop the event.
Issue Date: 24/12/2019 59min, which means that the event can actually overlap to the next day if needed. In addition, this will actually save one event slot been used. 2. Difference between the 3 types of event (Immediate / Scheduled / Repeat) Immediate Event → when user press the play button (turn to yellow) the activate command will be sent and devices will turn ON or OFF (depending on your setting). Note that the delay timer will count from the last device.
Issue Date: 24/12/2019 For example: ⚫ ⚫ ⚫ ⚫ If current time Tuesday 9am, then the user must set the event timer to be activated after Tue 9am. (i.e. Tuesday 9:01am ~ 9:05am etc..) If user sets the time at Tuesday 8:45am~8:55am then activated the event, immediately the device will turn ON then OFF straight away as the software thinks the time has gone past but still needs to execute the command.
Issue Date: 24/12/2019 Setting In the setting page, you can switch between 2 or more Skybridge devices, rename Skybridge device or synchronize configuration to AWS cloud service, turn On/Off Vibration from device control. 1. Switch in between Skybridge device. If you have another Skybridge device, you may switch within the one app and control the 2nd Skybridge device. 2. Rename Skybridge device.
Issue Date: 24/12/2019 3. Synchronize configuration onto AWS. You can share your settings to another smartphone by exporting data to AWS, and the 2nd smartphone imports the data from AWS. Export configuration press the ‘EXPORT TO CLOUD’ button to upload data. Once saved, the last setting date and time will be displayed at the bottom of the app.
Issue Date: 24/12/2019 Import configuration, press the ‘IMPORT FROM CLOUD’ button to download data onto 2nd Smartphone.
Issue Date: 24/12/2019 4. Specifications Input Rating: Radio Frequency: Environment Temperature: CE Certification: Dimension (L x W x H) Weight: SPECIFICATION DC 3V (1.5V AAA alkaline battery * 2) 433.92MHz, 2.4GHz 1-40 ºC The CE marked affixed to this product confirms Its complaisance with the European Directives Which apply to the product and in particular its compliance with the harmonizes standards and specifications.
5. Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.