Specifications

13
Issue Date: 24/12/2019
Cycle - repeat timer, set day(s) & start time.
(For your information, the app is written this way. Once user presses “SAVE”
button, it only sends the setting command packet to Skybridge device. Then if
user presses the activate / deactivate button (the  play button) the app then
send the command to start or stop the event. So this means user can save
settings and choose when to activate/deactivate events at the desired time)
Example Setting:
Immediate Event 8am ~ 5pm
Current time 8am.
1. Select electric fireplace ON.
2. Set the delay for 9hrs.
3. Electric fireplace will turn OFF at 5pm.
(you see that the last slot is the default ALL OFF command so that means
after the delay time all devices will turn OFF)
Software command flow chart for better understanding on the logic structure.
1. Default ALL OFF icon:
As you can see there is an ALL OFF icon at the very last slot of each event and
this is to avoid devices not turning OFF as it should at the completion of each
event.
The very last “clock” icon is for the user to set the delay off time for up to 23hrs
APPLICATION CONTROL