User's Manual

ManualsBrandsArcadyan Technology ManualsComputers & AccessoriesWLAN ACCESS POINT

Connecting and Configuring your Router

Adapter Mode

Installation

1. Mode Selecting Adapter Mode

Select “Adapter Mode”, then

click “Next”.

1.2

Move the center of the switch on

the back panel to align with the

word “Adapter”. Click “Next”.

. Connect

Connecting the Cables

. Connect

2.1

Connect one end of the included

Ethernet cable to the Router (which

is now functioning in Adapter

Mode) and the other end into your

PC’s RJ45 port. Next, plug the

included USB power cable into

the Router with the USB end in

the PC’s USB port, or plug the

included power supply into the

Router and then into a wall outlet.

Click “Next”.

Summary of content (10 pages)

PAGE 1
Connecting and Configuring your Router Adapter Mode Installation 1. Mode Selecting Adapter Mode 1.1 Select “Adapter Mode”, then click “Next”. 1.2 Move the center of the switch on the back panel to align with the word “Adapter”. Click “Next”. 2.. Connect Connecting the Cables 2.1 Connect one end of the included Ethernet cable to the Router (which is now functioning in Adapter Mode) and the other end into your PC’s RJ45 port.
PAGE 2
Connecting and Configuring your Router 2.2 Check to make sure that the Ethernet and Power LEDs on the front of the Router are on. Click “Next” to go to the Router’s home page on the Web. 1 2 3 5 3.. Configure Configuration for Adapter Mode 3.1 Wirelessly connect to a network from the “Available Networks” window. Select a network by clicking “Join” and then “Connect”. The status window will tell you the current status of the network to which the Router is currently connected. Click “Next”.
PAGE 3
Connecting and Configuring your Router Access Point Mode Installation 1. Mode Selecting the Access Point Mode 1.1 Select “Access Point Mode”. Click “Next”. 1.2 Move the center of the switch on the back panel to align with the word “AP”. Click “Next”. 2.. Connect Connecting the Cables 2.1 Connect one end of the included Ethernet cable to the Router (which is now functioning in Access Point Mode) and the other end to a cable/DSL modem.
PAGE 4
Connecting and Configuring your Router 2.2 From your PC, wirelessly connect 2 3 4 5 3.. Configure Configuration for Access Point Mode 3.1 Once you have established a connection with the Router, your installation is complete. However, if you would like to set up any advanced features (such as security features), you may click the “Advanced Features” button or type “192.168.2.254” into the navigation bar of your web browser.
PAGE 5
Using the Web-Based Advanced User Interface The Web-Based Advanced User Interface is a web-based tool that you can use to set up the Router if you don’t want to use the Easy Install Wizard. You can also use it to manage advanced Router functions.
PAGE 6
Using the Web-Based Advanced User Interface will take you to the login screen. The Router ships with no password. In the login screen, leave the password field blank and click “Submit” to log in. 1 2 3 4 6 7 Logging out of the Router One computer at a time can log into the Router to make changes to Router settings. Once a user has logged in to make changes, there are two ways that the computer can be logged out. The first is to click the “Logout” button. The second method is automatic.
PAGE 7
Using the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface The home page is the first page you will see when you access the Web-Based Advanced User Interface (UI). The home page provides a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page. (10) (2) (5) (4) (3) (6) (8) (1) (7) (9) 1. Quick-Navigation Links You can go directly to any of the Router’s UI pages by clicking directly on these links.
PAGE 8
Using the Web-Based Advanced User Interface 4. 1 Login/Logout Button 5. 6. Help Button 5 LAN Settings 7 Features Internet Settings Shows the settings of the Internet/WAN side of the Router that connects to the Internet. Changes to any of these settings can be made by clicking on the links or by clicking on the “Internet/WAN” “Quick Navigation” link on the left side of the screen. 9. 4 6 Shows the status of the Router’s NAT, firewall, and wireless features.
PAGE 9
Using the Web-Based Advanced User Interface Setting your Connection Type Setting your Internet Service Provider (ISP) Connection Type to Dynamic IP A dynamic connection is the most common connection type used with cable modems. Setting the connection type to “dynamic” in many cases is enough to complete the connection to your ISP. Some dynamic connections may require a host name. If your ISP assigned you a host name, you can enter it in the space provided.
PAGE 10
Using the Web-Based Advanced User Interface 1 2 3 4 (2) 5 6 Setting your Internet Service Provider (ISP) Connection Type to Static IP A static IP connection is less common than other connection types. If your ISP uses static IP addressing, you will need your IP address, subnet mask, and ISP gateway address. This information is available from your ISP. Type in your information, then click “Apply Changes” (4).