Datasheet

TINKERKIT BRACCIO ROBOT

Code: T050000

You can assemble your BRACCIO in a multitude of ways. Because it is

designed for versatility, the BRACCIO can also support various objects on the

end of the arm. The included BRACCIO shield allows you to hook up the

servos directly to your Arduino board.

Power

It is recommended to power the board via the jack connection with a regulated

5 VDC @ 5000 mA power supply provided in the box.

There is an on-board voltage regulator for higher voltages that protect the

Braccio shield. NOTE: The protection doesn’t work for the Arduino Yun if you

put the bridge between Vin and 5V on the Arm Robot Shield V1 (greater

version of are called Braccio shield and has a power switch on the top of the

shield)

PAGE 1
TINKERKIT BRACCIO ROBOT Code: T050000 You can assemble your BRACCIO in a multitude of ways. Because it is designed for versatility, the BRACCIO can also support various objects on the end of the arm. The included BRACCIO shield allows you to hook up the servos directly to your Arduino board. Power It is recommended to power the board via the jack connection with a regulated 5 VDC @ 5000 mA power supply provided in the box.
PAGE 2
Physical Characteristics • • • • • • • • • • • Plastic Parts x 21 Screws x 63 Flat Washer x 16 Hexagon Nut x 7 Springs x 2 Servo Motors: 2 x SR 311, 4 x SR 431 Arduino compatible Shield x 1 Power Supply 5V, 5A x 1 Phillips Screwdriver x 1 Double Hexagon Box Wrench x 1 Spiral Cable Protection Wrap x 1