Specifications

ADPS
68
3-36. Required Minimum Space for Installation
and Service (224, 280 Type)
● This air conditioner is usually installed above the
ceiling so that the indoor unit and ducts are not vis-
ible. Only the air intake and air outlet ports are visi-
ble from below.
● The minimum space for installation and service is
shown in Fig. 3-114a.
● It is recommended that space be provided (600 ×
600 mm) for checking and servicing the electrical
system.
● Fig. 3-114b shows the detailed dimensions of the
indoor unit.
Fig. 3-114b
Fig. 3-114a
Min. 600
(Space for
service)
Min. 700
(Space for
service)
Min. 610
Min. 130
Drain port
Drain pan
Ceiling face
Refrigerant
tubing
Electrical
component box
1170
(mm)
1100
(Suspension bolt pitch)
Air suction
side
5555
1200 1310
(Suspension bolt pitch)
Inspection
access
(600
600)
×
479
300
100
2
100 100
42
1428
1310
71
1100 51
1170 (Suspension bolt pitch)
964
9×100P=900
4 - 37×12
(Hole for suspension bolt)
26-ø3.5 (Holes all around)
28-ø3.5 (Holes all around)
10×100P=1000
106
44
1070
1310
67
67
1200 (Suspension bolt pitch)
113
(236)
364364
1334
60
43320
100
50
178
23
209344
1222
41
Refrigerant tubing joint (narrow tube ø12.7 mm)
Refrigerant tubing joint (wide tube ø28.6 mm)
Power supply outlet
Drain port (O.D. 32 mm)
Duct connection for suction
Duct connection for discharge
Unit: mm
Unit: mm
04-396 InverterW_p51-108 ARGO 12/21/04 10:17 AM Page 68