Operation Manual

11
V 02/16
Tulip - STAND FAN - ASSEMBLY INSTRUCTIONS OF THE BASE
Open the box and remove the parts of the appliance.
CONNECT THE ROD TO THE BASE USING THE SUPPLIED LOCKING LEVER AND FOLLOW THESE INSTRUCTIONS:
1. The fan is supplied with the locking
lever included into the outer rod.
2. Loose the locking lever. 3. Remove the locking lever.
4 Insert the base below the outer rod.
5. Tighten the locking lever.
6. The base is inserted.
7. Unscrew the ring for adjusting the
height and pull out the inner rod.
8. Mount the part with the fan.
9. Screw the screw.
The appliance does not need to be installed.
Position the unit on a flat, stable surface.
To move the fan use the handle on the back.