Assembly Instructions

2 Tier Chrome Shoe Rack

Dimensions

Width - 62/111.5cm

Depth - 24cm

Height - 37cm

Important - Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Assembly Instructions - Please keep for future reference

875/4334

PAGE 1
2 Tier Chrome Shoe Rack Assembly Instructions - Please keep for future reference 875/4334 Dimensions Width - 62/111.
PAGE 2
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Keep children and animals away from the work area, small parts are a choking hazard. • Assemble on a pad to avoid damaging the unit or your floor. • Remove all fittings from the plastic bags and separate them into their groups. • Make sure you have enough space to layout the parts before starting.
PAGE 3
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 08456 400800 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. A 26mm Screw x 8 Tools required Phillips screwdriver (medium & large) Assembly Instructions Step 1 Finishing the Tubes a: Slide tubes 2 a: into 1 Tubes 1 .
PAGE 4
Assembly Instructions Step 2 Finishing the Unit a: Use Screws to fix the Sides 3 onto the Tubes. With help, place the unit in the intended position. A a: 3 3 A A A A A A b: b: Set the width of the unit using the Tube clamps 4 . Loosen all 4 clamps. Slide the tubes to the desired width and tighten the clamps to fix in position. 4 Adjustment Range: 62-111.5cm. Assembly is complete.