Assembly Instructions

Small piece of
waste wood
Assembly Instructions
12
Step 16
This will be the
RIGHT DOOR
This will be the
LEFT DOOR
ONLY drill these 2 holes
in 1 of the doors
DO NOT drill
these holes
DO NOT drill
these holes
Important:
Check that the hinges and holes are in the same place as these diagrams.
ONLY drill these 2 holes
in 1 of the doors
Prepare the doors
Push fit 2 hinges into
each door .
Secure each hinge with
2 screws .
H
O
6
6
Step 17
Drill 2 handle holes in
each door
Important: Please follow
these instructions
carefully.
Lay the 2 doors
down onto a smooth
surface.
Check that the hinges
and holes are in the
same place as the
diagrams.
Note: We recommend
the use of a small piece
of waste wood, placed
behind the holes while
drilling, to reduce the
possibility of any
breakout.
Using the pilot holes in
the rear face of the door
. , drill through the
holes indicated opposite,
using a 2.5mm diameter
drill.
Turn the door over
and open out the 2.5mm
holes that you have just
drilled by drilling back
through it with a 5mm
drill.
6
6
6
Note: Before securing with the screws, make sure that the
hinges are positioned at 90 degrees with the edge of the door.
6
6
90
O
O
H
H
O
H
H
Small piece of
waste wood
x 2