User manual


STEP 4 S – Select the time for the second cycle
 or  

STEP 5 S – Select the time for the third cycle
 or 

STEP 6 S – Select the time for the fourth cycle
 or 

STEP 7 S – Select the time for the fth cycle

 or  

STEP 8 S – Select the time for the sixth cycle
 or 
STEP 9 S - Set Grain Capacity or  






Factory setting is the capacity of the softener at
medium salting.

STEP 10 S – Select between proportional or normal brining. or 
Proportional brining is only available if congured as prell/upow softener or
screen will not appear. 
-
Factory Setting = Normal brining.

STEP 11 S – Set Gallons Capacity or 
-

-






 Factory Setting is AUTO.

Figure 12a
Step 4S
SOFTENING TIME
120:00
MIN
Step 5S
SET
8:00
MIN
BACKWASH TIME
Step 6S
SET
60:00
MIN
DRAW TIME
Step 7S
SET
BACKWASH TIME


 
Step 8S
RINSE TIME

Step 9S
GRAIN OF CAPACITY
64.0

x1K
Step 11S
RESERVE CALCULATOR
AUTO

SET
Step 10S
SET

NORMAL
SET
8:00
SET
MIN
4:00
SET
MIN
FILL