Installation Guide
Ariel Platinum
TB326 Toilet
Ariel Platinum TB326 Contemporary
European Toilet
• GPF 1.27
• Waste Pipe Diameter 2"
• Waste Pipe Rough-IN 12"
• Water Supply Thread
• Water Supply Location (measurement from side of the
toilet) LEFT 3" X 16"
•
• Width of rear of toilet at 6 -inches from oor: 13 1/2"
• Shut-off valve clearance from centerline measured 6"
from oor: 7.25" (+3")
• Waste Pipe Connection: One t technology connecting
pipe
• Flush Location: Side
• Flush Type: Single
•
• Soft Close: No
• Siphonic Jet Feature: Yes
Meets or Exceeds the following Specications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitre-
ous China Fixtures
• UPC
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM
DIMENSION OF 305MM (12”) FROM FINISHED WALL TO C/L OF TOILET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED,
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY
• Bowl Height: 15.5"
• Overall Depth: 28"
• Overall Width: 15.25"
• Overall Height: 30.75"
Dimensions:
Nominal Dimensions
Compliance Certication
NOTES:
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerance established by ANSI Standard A112.19.2
These Mesurements are subject to change. No responsibility is assu-
med for use of superseded or voided pages.