Product Manual

EN - 30
NOTE: Reverse speed cannot be adjusted. If
unit tracks excessively left or right in reverse,
see your dealer for repair.
REPLACING PTO BELT
Remove
(Figure 24)
1. Lower mower deck to the ground.
2. Remove belt covers from mower deck.
3. Rotate idler arm clockwise until tension
is removed from PTO belt.
4. Remove PTO belt from left mower deck
pulley.
5. Slowly release idler arm until tension is
removed from idler spring.
6. Remove PTO belt from mower deck and
engine drive pulley.
Install
(Figure 24)
NOTE: Do not install PTO belt on left mower
deck pulley in step 1.
1. Install PTO belt on engine drive pulley
and mower deck.
CAUTION: Use care when
releasing idler spring tension.
Keep body parts well away from
idler when performing this
operation.
Figure 23
1. Forward Travel Adjustment Bolt
2. Lower Control Arm
1
2
Model 915211
Figure 24
1. Deck Spindle
2. Engine Drive Pulley
3. Deck Idler
4. PTO Belt
2
3
4
1
1
Models 915213, 215
Figure 25
1. Deck Spindle
2. Engine Drive Pulley
3. Deck Idler
4. PTO Belt
3
4
1
1
2