Full Product Manual
Table Of Contents
- Welcome
- Safety
- Practices & Laws
- Emission Control System
- Required Operator Training
- Safety Alert Symbol
- Signal Words
- Safety Decals
- Safety Rules
- Controls and Features
- Ignition Key
- Choke Control Knob
- Throttle Control Lever
- Power-Take-Off (PTO) Knob
- Hour Meter
- Height-of-Cut Dial
- Deck Lift Pedal
- Seat Adjustment Lever
- Parking Brake Lever
- Safety Interlock System
- Steering Levers
- Transaxle Bypass Levers
- Anti-scalp Rollers
- Operation
- Emergency Stopping
- Before Operating Unit
- Start the Engine
- Operate Unit
- Stop the Engine
- Move Unit Manually
- Transport Unit
- Maintenance
- Maintenance Schedule
- Service Parts
- Service Position
- Check Safety Interlock System
- Check Parking Brake
- Check Engine Oil
- Check Tire Pressure
- Check Carbon Canister Filter
- Check Fasteners
- Lubricate Unit
- Check Mower Blades
- Check Battery
- Check Mower Belts
- Hydraulic Oil
- Adjustments
- Adjust Seat
- Adjust Steering Levers
- Adjust Unit to Track Straight
- Adjust Parking Brake Lever
- Remove and Install Mower Deck
- Adjust Mower Deck
- Troubleshooting
- Storage
- Short-Term Storage
- Long-Term Storage
- Start-of-Season Preparation
- Accessories
- Specifications
- Warr anty
- Blank Page
EN - 35
SHORT-TERM STORAGE
IMPORTANT: NEVER wash unit with high-
pressure water or store outdoors.
1. Allow unit to cool and clean with mild
soap and water.
2. Tighten all hardware to correct
specifications.
3. Inspect unit for visible signs of wear or
damage. Repair as needed.
4. Prepare fuel system for storage.
NOTICE: Ariens recommends using a quality
fuel stabilizer in all fuel. Gasoline left in the
fuel system without a stabilizer, even for short
periods of time, deteriorates and leaves
gummy deposits in the system that may
damage the carburetor and fuel hoses, filter
and tank. For the best effectiveness, add
stabilizer to all fuel containers whenever
purchasing fuel. Add the stabilizer to the
container before adding fuel.
a. Add fuel stabilizer (see Service Parts
on page 16) or equivalent according
to manufacturer's instructions to the
fuel tank and any fuel containers with
remaining fuel.
b. Run engine outdoors for at least
5 minutes to allow stabilizer to reach
the carburetor.
5. Turn ignition key to off position and
remove from ignition.
6. Store unit in a cool, dry, protected area.
DO NOT store unit outdoors.
LONG-TERM STORAGE
1. Perform short-term storage procedures.
2. Lubricate as directed in Maintenance on
page 16.
3. Touch-up all scratched painted surfaces.
4. Remove and charge battery as directed
in Charge Battery on page 23. Store
battery in a cool, dry, protected area.
5. Store unit in a cool, dry, protected area.
Do not store unit outdoors.
START-OF-SEASON
PREPARATION
1. Before adding fuel for the first time after
long-term storage, add fresh, stabilizer-
treated fuel to fuel tank and any fuel
containers with remaining fuel.
2. Charge and install the battery.
See your Ariens dealer for a complete list of
compatible accessories and attachments for
your unit.
STORAGE ACCESSORIES
Description Part No.
Mulch Kit – 42" 71513900
Mulch Kit – 52" 71514000
Mulch Kit – 60" 71514400
Headlight Kit 71514100
Bagger Kit – 42" & 52" only 81504300