User Manual

Page 1 of 3

INSTALLATION INSTRUCTIONS

1966-1977 FORD BRONCO

PART # 203038 / 203038-2

PARTS LIST:

Qty Description Qty Description

1 Driver/Left Sidebar 14 10mm Lock Washers

1 Passenger/Right Sidebar 28 10mm flat washers

1 Driver/Left Front Mounting Bracket 14 10mm Hex Nuts

1 Passenger/Right Front Mounting Bracket 2 5/8” Nuts

14 10mm x 40mm Hex Bolts 2 16mm Lock washers

PASSENGER SIDE SHOWN

Passen

& Drive

Side Front Mountin

Bracket

Passen

ht Sideba

Front of Sideba

PAGE 1
INSTALLATION INSTRUCTIONS 1966-1977 FORD BRONCO PART # 203038 / 203038-2 PARTS LIST: Qty 1 1 1 1 14 Description Driver/Left Sidebar Passenger/Right Sidebar Driver/Left Front Mounting Bracket Passenger/Right Front Mounting Bracket 10mm x 40mm Hex Bolts Qty 14 28 14 2 2 Description 10mm Lock Washers 10mm flat washers 10mm Hex Nuts 5/8” Nuts 16mm Lock washers PASSENGER SIDE SHOWN Passenger/Right Sidebar Front of Sidebars Passenger & Driver Side Front Mounting Bracket Page 1 of 3
PAGE 2
PROCEDURE: 1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. Drilling (3) 10mm holes are required per side. 2. Select the passenger sidebar from the list of parts & attach the front mounting bracket to the front leg of the sidebar with (4) 10mm hex bolts,(8) 10mm flat washers,(4) 10mm lock washers & (4) 10mm nuts as see in (FIG 1) offset portion of bracket fits towards the frame Snug but do not tighten hardware at this time. 3.
PAGE 3
PASSENGER SIDE INSTALLATION PICTURED Fig 3 Fig 4 (1) 5/8” Hex Nut (1) 16mm Lock Washer Level side bar to cab Fig 5 Mark holes for drilling Fig 6 10mm holes drilled Fig 7 (3) 10mm Hex bolts (6) 10mm Flat washer (3) 10mm Lock washer (3) 10mm flat washer Installation complete Page 3 of 3