Instruction Manual

ManualsBrandsAries Automotive ManualsCar204017

PARTS LIST:

1 Driver/Left Sidebar 4 M12 -1.75 x 120mm Hex Head bolts

1 Passenger/Right Sidebar 4 12mm x 50mm Hex Bolts

1 Driver/Left Front Mounting Bracket 8 12mm Flat Washers

1 Passenger/Right Front Mounting Bracket 8 12mm Lock Washers

1 Driver/Left Rear Mounting Bracket 4 12mm Hex Nuts

1 Passenger/Right Rear Mounting Bracket 2 Bolt Tabs

1 Driver front brace bracket 99-11 Reg Cab 2 (2011 Models) 10mm x 30mm Hex Bolt

1 Passenger front brace bracket 99-11 Reg Cab 2 (2011 Models) 10mm Nut Plate

1 Driver front brace bracket 2011 HD Reg Cab 2 (2011 Models) 10mm Lock Washers

1 Passenger front brace bracket 2011 HD Reg Cab 2 (2011 Models) 10mm ID x 25mm OD Flat Washers

Page 1 of 3

Driver Side Rear

Mounting Bracket

Driver Side Front

Mounting Bracket

Passenger Side

Mounting Bracket

Front

Passenger Side

Rear Mounting

Bracket

INSTALLATION INSTRUCTIONS

99-12 CHEVY SILVERADO REG CAB / 01-12 CHEVY HD REG CAB

99-12 GMC SIERRA REG CAB / 01-12 GMC SIERRA HD REG CAB

PART # 204017 / 204017-2

Front

Passenger/Right Sidebar

Driver/Left Sideba

99-11

Driver Side

Front Brace

Bracket

99-11

Passenger Side

Front

Brace Bracket

Driver & Passenger

Bolt tabs X 2

(2011 Models)

Driver &

Passenger Nut

Plates

2011 HD

Driver Side

Brace

Bracket

Front

2011 HD

Passenger

Side Front

Brace

Bracket

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS 99-12 CHEVY SILVERADO REG CAB / 01-12 CHEVY HD REG CAB 99-12 GMC SIERRA REG CAB / 01-12 GMC SIERRA HD REG CAB PART # 204017 / 204017-2 PARTS LIST: 1 1 1 1 1 1 1 1 1 1 Driver/Left Sidebar Passenger/Right Sidebar Driver/Left Front Mounting Bracket Passenger/Right Front Mounting Bracket Driver/Left Rear Mounting Bracket Passenger/Right Rear Mounting Bracket Driver front brace bracket 99-11 Reg Cab Passenger front brace bracket 99-11 Reg Cab Driver front brace bracket 2011 HD Reg Cab
PAGE 2
PROCEDURE: 1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. 2. From underside of vehicle, remove the driver side body mounts. And install the front driver side Mounting Bracket to the body mount. Secure with (1) 12mm x 120mm Hex Head Bolt, (1) 12mm Lock Washer, and (1) 12mm Flat Washer. Secure the rear mount bracket with the (1) 12mm x 120mm Hex Head Bolt, (1) 12mm Lock Washer, and (1) 12mm Flat Washer. As shown in Diagram below.
PAGE 3
Diagram 1 Driver/left front frame rail Driver/left Rear Mount bracket (1) 12mm flat washer (1) 12mm lock washer (1) 12mm hex bolt Rear Bolt tab Driver/left front Brace bracket (1) 12mm flat washer (1) 12mm lock washer (1) 12mm hex bolt (1) 12mm x 120mm Hex bolt (1) 12mm flat washer (1) 12mm lock washer Driver/left front Mount bracket Driver/left side bar (1) 12mm flat washer (1) 12mm lock washer (1) 12mm nut (1) 12mm x 120mm Hex bolt (1) 12mm flat washer (1) 12mm lock washer Diagram 2 Nut Plate D
PAGE 4
INSTALLTION ALERT General Motors has made changes to their late model 2010 and 2012 Chevrolet Silverado and GMC Sierra Light Duty and Heavy Duty Trucks and these changes affect the installation of our Side Bars. Currently, all Side Bars manufactured for GM trucks use the factory body mount bolts to attach the bars and brackets to the truck. In years past, GM used a fixed nut that was welded in place to the chassis of the truck.