User Manual

(888) 800-ARIES

824 E. Anaheim St., Ste A

Wilmington, CA 90744

Part No. 204018, 204018-2

Application: 1988-99 GM C/K SERIES PICKUP EXT.CAB

1992-00 GM C/K SERIES PICKUP CREW CAB

1997-99 GM/CK SERIES PICKUP 3 DOOR

1995-99 CHEVY TAHOE 2 DOOR

1988-99 GM C/K SERIES PICKUP REG. CAB

1992-94 CHEVY BLAZER FULLSIZE 2 DOOR

1992-99 GMC YUKON 2 DOOR

PARTS LIST

ITEM DESCRIPTION QUANTITY

1. STEP BAR-DRIVER SIDE 1

2. STEP BAR-PASSENGER SIDE 1

3. FRONT MOUNT BRACKET 2

4. REAR MOUNT BRACKET 2

5. 1/2 -13 X 2.00” HEX HEAD BOLT 4

6. M12 – 1.75 X 120 MM LG. HEX HEAD BOLT 4

7. ½” LOCK WASHER, ZINC PLATED 8

8. ½” FLAT WASHER, ZINC PLATED 8

TOOLS REQUIRED

ITEM DESCRIPTION QUANTITY

1. 15MM SOCKET 1

2. 18MM SOCKET 1

3. ¾” –SOCKET 1

4. ¾” COMBINATION WRENCH 1

5. TORQUE WRENCH 1

6. RATCET 1

INSTALLATION INSTRUCTIONS

STEP 1

Remove the contents from the box and check for any damage. Verify all parts against the parts list.

STEP 2

Read and understand instructions completely before beginning installation.

STEP 3

Bolt mount brackets to vehicle body mounts using metric bolts provided in parts kit. See figure 1.

STEP 4

Position step bar up to the mount brackets and fasten with the ½” bolts and washers provided in the parts kit. Secure rear

leg of step bar to correct hole location for your vehicle. Tube should not touch vehicle body. See figure 1.

STEP 5

PAGE 1
(888) 800-ARIES 824 E. Anaheim St., Ste A Wilmington, CA 90744 Part No. 204018, 204018-2 Application: 1988-99 GM C/K SERIES PICKUP EXT.CAB 1992-00 GM C/K SERIES PICKUP CREW CAB 1997-99 GM/CK SERIES PICKUP 3 DOOR 1995-99 CHEVY TAHOE 2 DOOR 1988-99 GM C/K SERIES PICKUP REG. CAB 1992-94 CHEVY BLAZER FULLSIZE 2 DOOR 1992-99 GMC YUKON 2 DOOR PARTS LIST ITEM DESCRIPTION 1. 2. 3. 4. 5. 6. 7. 8. STEP BAR-DRIVER SIDE STEP BAR-PASSENGER SIDE FRONT MOUNT BRACKET REAR MOUNT BRACKET 1/2 -13 X 2.
PAGE 2
Check to be sure Step Bar is properly aligned with vehicle. Tighten and torque all mounting bracket bolts to 55 FT.LBS. FINISH PROTECTION- ARIES PRODUCTS HAVE A HIGH FINISH THAT MUST BE MAINTAINED SUCH AS ANY OTHER HIGH FINISH PRODUCT ON THE VEHICLE. PROTECT THE FINISH WITH A NON-ABRASIVE AUTOMOTIVE WAX. THE USE OF SOAP, POLISH, OR WAX THAT CONTAINS ABRASIVES IS DETRIMENTAL, AS THE COMPOUNDS SCRATCH THE FINISH AND OPEN IT TO CORROSION.
PAGE 3