Manual

ManualsBrandsAries Automotive ManualsCar305556

PARTS LIST:

Qty Description Qty Description

1 Back Bumper 2 8mm x 35mm Hex Bolts

1 Driver/Left Mount Bracket 6 8mm x 25mm Hex Bolts

1 Passenger/Right Mount Bracket 16 8mm Flat Washers

1 Driver/Left Brace Bracket 8 8mm Lock washers

1 Passenger/Right Brace Bracket 8 8mm Hex Nuts

Page 1 of 4 5/23/2012)

INSTALLATION INSTRUCTIONS

11-2012 FIAT LOUNGE / POP BACK BUMPER

PART# B305556 / 305556

Driver/left side

Mount Bracket

Driver/left side

Brace Bracket

Passenger/Right

side Mount

Bracket

Passenger/Right

side Brace Bracket

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS 11-2012 FIAT LOUNGE / POP BACK BUMPER PART# B305556 / 305556 PARTS LIST: Qty 1 1 1 1 1 Description Back Bumper Driver/Left Mount Bracket Passenger/Right Mount Bracket Driver/Left Brace Bracket Passenger/Right Brace Bracket Driver/left side Mount Bracket Qty 2 6 16 8 8 Description 8mm x 35mm Hex Bolts 8mm x 25mm Hex Bolts 8mm Flat Washers 8mm Lock washers 8mm Hex Nuts Passenger/Right side Mount Bracket Driver/left side Brace Bracket Passenger/Right side Brace Bracket Page 1
PAGE 2
PROCEDURE: 1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. 2. Start by removing the two bolts securing the lip of the rear bumper cover as seen in (Fig 1) also remove the plastic clips the bolts screwed into seen in (Fig 1A), with the bolt & the clips removed.
PAGE 3
Fig 1 Fig 1A Passenger side shown Remove factory bolts Remove plastic nut inserts Fig 3 Fig 2 Attach with 8mm x 25mm Hex bolt 8mm Flat washer 8mm Lock washer 8mm Nut Brace bracket Passenger/right side shown with brace Fig 4 Driver/left side shown Attach with 8mm x 25mm Hex bolt 8mm Flat washer 8mm Lock washer 8mm Nut Remove factory nut 8mm x 25mm Hex bolt 8mm Flat washer 8mm Lock washer 8mm Nut Attach with 8mm x 35mm Hex bolt 8mm Flat washer 8mm Lock washer 8mm Nut Driver/left side shown with o
PAGE 4
Fig 6 Fig 6A Brace bracket Brace bracket Attach with 8mm x 35mm Hex bolt 8mm Flat washer 8mm Lock washer 8mm Nut Installation complete Page 4 of 4 5/23/2012)