Instructions / Assembly
11
Installation instructions
Typical installation
Theventhoodmustbeinstalledabovethecookingsurfaceat30"(minimum)ifagasrangeisusedorfrom24"
(minimum)to30"ifanelectricrangeisused.
The hood may be installed onto a wall and vented to the outdoors, or it can be installed for recirculating operation
(recirculatingaccessoriesnotsuppliedwiththehood).
This hood must not be installed over any professional cooktop / range.
1. Choosing the vent options
The hood design is ready to be used for vertical discharge as shown below.
Ifdesired,thehoodcanbeconvertedforhorizontaldischargeasshownbelow.
DUCTING
ProvideaRoundDucthavingadiameterof8”,refertoductttings
Installa1/2”conduitfromtheservicepanellongenoughtoreachthehoodonceitisinstalled.
Powersupplymustberatedfor120VAC,60Hz.15or20A.
Filter
Round Duct
Sot
Blower
Lamp
Transition
Hood
Horizontal discharge
30” min Gas Cooktop
24” min Electric Cooktop
30” min Gas Cooktop
24” min Electric Cooktop
30” min Gas Cooktop
24” min Electric Cooktop
Hood
Lamp
Sot
*Deector
Blower
Filter
* Charcoal lters
* Optional accessory - Ductless recirculation kit
Vertical discharge with recirculation
option
Round Duct
Sot
Transition
Filter
Blower
Lamp
Hood
Vertical discharge with vented option
Examples of possible ducting
INSTALLING THE HOOD
• Determinetheexactlocationoftheventhood.
• Forthemostefcientairowexhaust,useastraightrunorasfewelbowsaspossible.
CAUTION: Ventunittooutsideofbuilding,only.
Installation steps:
The following installation steps are required for wall mount installation or alternative cabinet installation.