Instructions / Assembly

9
CHECK INSTALLATION HARDWARE
6 Screws 5 x 35
4 assembly screws for transition
Locate the hardware accesories box packed
with the hood
Pliers
Duct tape
Safety glasses
Masking tape
2 Hooks with regulating screw
4 Washers
Measuring tape
Knife
Wire cutter/stripper
Spirit level
Gloves
Strain relief
8?round metal duct,
length to suit installation
Saw, jig saw or
reciprocating saw
Hammer
Screwdrivers:
Phillips (Posidrive) # 2
Torx # 2
Wire nuts
Electric drill with
5/16” and 3/8” Bits
TOOLS REQUIRED FOR INSTALATION
List of Materials
Parts included in your hood
•Hood Canopy Assembly with blower, grease
ltersandlampsalreadyinstalled
• Care & Use /Installation Instructions
• Transition
•Fittingsbagwith:
 4Washers
 2 Hooks with regulating screws
6 Screws 5X35
4 screws for transition
•2greaselters(30")or3greaselters(36")
Parts Not Included with your Hood
• Duct Tape
• 1/2" Conduit
• Wire Nuts
•RoundorRectangularDuct.
•Roundbackdraftdamper
• Wiring clamp
• Wall fastener anchors
(foroptionalinstallationtoconcrete/masonrywalls.)
Optional accessories
• Duct covers
• Ductless recirculation kit
Materials required
• Duct tape
• Wire nuts
• Tape to mount template
• 8"roundedmetalduct(lenghttosuitinstallation)