Copier User Manual

Copying
102
2
E Set an erase border width with [n] or [o].
Pressing [n] or [o] changes the width in increments of 1 mm (0.1 inch).
Pressing and holding down the relevant key changes the width in increments
of 10 mm (0.4 inch).
F Press [OK] twice.
G Place your originals, and then press the {Start} key.
Note
❒ To change the value entered in step
E
, press [n] and [o] to set a new val-
ue.
Border Erase (different width)
This mode erases the edge margin of the original image.
A Press [Edit / Color].
B Press [Erase].
C Press [Erase Center / Border].
D Press [Different Width ].