Copier User Manual

Supplementary Informations
175
4
❖ Image Repeat
• Depending on the paper size, ratio, and orientation, parts of repeated im-
ages may not be copied.
❖ Centering
• Though the original is set to a different orientation from the paper loaded,
the machine will not rotate the image by 90° (Rotate copy).
❖ Erase
• The width of the erased margin varies depending on the reproduction ra-
tio.
• If the size of the original is different from sizes listed in the following
chart,the erased margin might be shifted:
•Metric version
Exposure glass : A3L, B4 JISL, A4KL, B5 JISKL
ADF : A3L, B4 JISL, A4KL, B5 JISKL, A5KL
•Inch version
Exposure glass: 11” × 17”L, 8
1
/
2
” × 14”L, 8
1
/
2
” × 11”KL
ADF: 11”×17”L, 8
1
/
2
” × 14”L, 8
1
/
2
” × 11”KL, 5/
2
” × 8
1
/
2
”L
❖ Background Numbering
• The numbers appear to overlap the copied image in some cases.
❖ Margin Adjustment
• If you set a binding margin that is too wide, part of the image may not be
copied.
• When making copies in Combine mode, the binding margin is added to
the copies after the combination is finished.
❖ Preset Stamp
• You can change the size and density of the stamp with User Tools. De-
pending on the setting, density may change.
• Depending on paper size, if you change the stamp size, parts of the stamp
might not be printed.