User Manual

\ 23
GB
METHODS OF USING THE BUTTONS
Automatic operation
Make sure that the unit is connected to a regularly functioning electrical socket.
1. Press the MODE button to select AUTO.
2. Press the +/- button to set the desired temperature. The temperature may be set be-
tween 17°C and 30°C, with 1°C increases.
3. Press the ON/OFF button to switch the air conditioning unit on.
NOTE
1. In Auto mode, the air conditioning unit may alternate automatically between the cool-
ing, fan and heating modes, recording the diff erence between the actual room tem-
perature and the temperature set in the remote control system.
2. In Auto mode, it is not possible to select the fan speed, which is automatically ad-
justed.
3. If the Auto mode does not provide the right comfort, it is possible to manually select
the desired mode.
Cooling / heating / fan function
Make sure that the unit is connected to a regularly functioning electrical socket.
1. Press the MODE button to select the COOL, HEAT or FAN mode.
2. Press the +/- buttons to set the desired temperature. The temperature may be set
between 17°C and 30°C, with 1°C increases.
3. Press the FAN button to select in sequence the four speed options available: AUTO
(automatic), (
) LOW, ( ) MED and ( ) HIGH.
4. Press the ON/OFF button to switch the air conditioning unit on.
NOTE
In FAN mode, the set temperature is not displayed in the remote control system and it is
not possible to adjust the room temperature.
Dehumidifi cation function
Make sure that the unit is connected to a regularly functioning electrical socket.
1. Press the MODE button to select the DRY mode.
2. Press the +/- buttons to set the desired temperature. The temperature may be set
between 17°C and 30°C, with 1°C increases.
3. Press the ON/OFF button to switch the air conditioning unit on.
NOTE
In dehumidifi cation mode, it is not possible to select the fan speed, which is automati-
cally adjusted.