User Manual

\ 27

TEMP

auto

TIMER OFF

COMBINED TIMER

(Simultaneous setting of the start up and shut down timers)

TIMER OFF > TIMER ON

(On > Stop > Start operation)

This function may be useful, for example, when you want to shut

down the air conditioning unit after going to bed, to then start it

up again when you wake up or come home.

Example:

Programmed stop of the air conditioning unit after 2 hours and

programmed restart after 10 hours.

1. Press the TIMER button to display TIMER OFF.

2. Press the +/- buttons to show 2.0H in the TIMER OFF area of

the display.

3. Press the TIMER button to display TIMER ON.

4. Press the +/- buttons to show 10H in the TIMER ON area of the

display.

5. After three seconds, in the same area of the digital display, the

temperature will be shown again. The “TIMER ON OFF” indica-

tor stays lit to conﬁ rm that the function was activated.

TIMER ON > TIMER OFF

(Oﬀ > Start up > Stop operation)

This function is useful, for example, when you want to start up the

air conditioning unit in the morning before getting up and turn it

oﬀ when leaving the house.

Example:

Programmed start up of the air conditioning unit after 2 hours and

stop after 5 hours.

1. Press the TIMER button to display TIMER ON.

2. Press the +/- buttons to show 0H in the TIMER ON area of the

display.

3. Press the TIMER button to display TIMER OFF.

4. Press the +/- buttons to show 0H in the TIMER OFF area of the

display.

5. After three seconds, in the same area of the digital display, the

temperature will be shown again. The “TIMER ON OFF” indica-

tor stays lit to conﬁ rm that the function was activated.

NOTE: The ﬁ rst function of the timer (TIMER ON or TIMER OFF) to

operate is the ﬁ rst in sequence after the setting time.