Technical information

48
1. Remove the latent heat exchanger - see paragh. 6.3.8
2. Unscrew the two screws “Y” (FIG.6.36);
3. Remove the recuperaor (FI
G
.6.37);
4
.
R
eassemble in reverse order.
TH
E SIDE COVER OF THE RECUPERATOR MUST NOT BE REMOVED
,
THE TWO SCREWS ARE COVERED BY SECURITY PAINT, THERE IS A
DANGER THAT FLUE GASSES COULD LEAK INTO THE ROOM IF THE
F
RONT COVER IS REMOVED
.
SH
OULD IT BE NECESSARY TO REMOVE THE RECUPERATOR
, T
HE
W
HOLE UNIT MUST BE REMOVED.
6.3.9 Removing the Recuperator
FIG. 6.36
Y
Y
FIG. 6.37
1. Remove the clamp “Z” (FIG.6.38);
2. Remove the clamp “A1” (FIG.6.39);
3. Unscrew and remove the trap from the boiler (FI
G
.6.40);
3
.
R
emove the trap (F
I
G
.
6.41).
4. Reassemble in reverse order
6.3.10 Removing the Condensate Trap
FIG. 6.38
Z
FIG. 6.39
FIG. 6.40
FIG. 6.41
A1