Submittal

IN/OUT BOX
™
for Ceiling Fixtures
NEW!
Outlet boxes
on back
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717
Fax [phone]
www.aifittings.com
Arlington
Arlington’s IN/OUT BOX for ceiling
fixtures adjusts up to 1-1/2" to
accommodate varying ceiling
thicknesses, like single or double
drywall.
• Pre-set for 1/2" ceiling...
Depth adjusts up to 1-1/2"
• Always accessible depth adjustment
screw allows for depth adjustment
of box before or after the ceiling is
in place
• Complies with 2014 NEC, 314.20
for set back boxes
• Mounts securely to joist
in new construction
• Listed for fixture support up to 50 lbs
• UL/CSA Listed
Adjustable Non-Metallic Box for New Construction
M
ade in USA
FA426
Adjustable Fixture Box
Patent pending
E
asy Installation
in New Construction
Depth adjustment screw
1 Install FA426 onto joist with a
MINIMUM of four screws; (2)
through front flange, (1) in each
rear position. A, B, C, D above.
A
B
C
D
Catalog UPC/DEI/NAED Description Size/ Unit/Std
Number Mfg. #018997
Non-Metallic IN/OUT BOX™ Cu Inches Pkg
FA426 40040 Adjustable Ceiling Fixture Box Round 25/ctn
20.5 cu in
FA426GC 40041 Adjustable Ceiling Fixture Box Round 25/ctn
w/ ground clip for Canada 20.5 cu in
Includes (4) installation screws, NM cable connector
Pre-set for 1/2" wall thickness - Depth adjustment up to 1-1/2"
2 After installing the box on joist
slide plastic insert into box.
Pull NM cable through installed
NM connector.
NEW!
3 After installation of wall board is complete use the depth adjustment screw
to adjust position of FA426 box if necessary (see Photo B).
FA426 adjusts up to 1-1/2" for ceiling thickness.
Photo A (cutaway)
shows box set back in
double drywall ceiling
Photo B
Box now
flush with
ceiling