SDS

____________________________________________________________________________________
______________________________________________________________________________
1. Scope
Specifications described in sections apply to the GC-SDC-763740-010H rechargeable batteries supplied by Celxpert Energy
Corporation. The battery described in these specifications is the battery pack, which consists of unit cells manufactured by Amperex
Technology Limited
2. Type and Name
Applied Product Name
Rechargeable Li-Polymer Battery Pack
Cell Type
GC-SDC-763740-010H
Cell Configuration
1 series 3 parallel ( 1 S 3 P )
BMU Solution
bq27z561+bq298015
3. œŢŵŪůŨġ
No
Item
Specification
Remarks
1
Normal Capacity
4875mAh
2
Minimum Capacity
4800mAh
3
Nominal Voltage
3.85 V
4
Charge Voltage
4.40 V
5
Max. Continuous Charge Current
3000mA
6
Max. Continuous Discharge Current
3000mA
7
End of Discharging Voltage
3.00 V
8
Internal Impedance
ʀ
100mΩ
9
Operating Temperature
For Ambient
Charge
0
°C
~
40
°C
Discharge
-20
°C
~
40
°C
10
Cell
Suface Temperature For
max.charge/discharge condition
Charge
0
°C
~
20
°C
960mA Max
20
°C
~
45
°C
3A Max charge to 4.2V, then 2.4A Max charge to 4.4V
45
°C
~
60
°C
3A Max (Max. charge voltage 4.1V)
Discharge
-20
°C
~
0
°C
1.5A Max
0
°C
~
60
°C
3A Max
11
Storage Temperature
3 month
-
20
°C
~
45
°C
1. ʀ3 months: the cell shall be stored at the
temperature of 20
°C ~45°C and Hunidity
Condition
specifications at all times.
The voltage shall be shipping status.
2.
ʁ 3 months: the cell shall be stored at the
temperature Condition and Hunidity Condition
specified in the specifications at all times. The voltage
shall be 3.6V to 3.9V
range. After storage, the
recoverable capacity will loss little by little with the
time.
1 year
-
20
°C
~
30
°C
12
Shipping Voltage
3.75
V ~
3.95
V
SOCʀ60%(*1)
13
Current Consumption
ʀ80uA
Running mode
ʀ20uA
Sleep Current
14
Pack Weight
90 g ± 5g
*1: The shipping voltage detection specification is only grant 4 weeks warranty after manufacture date. The SOC value is
not equal to the fuel gauge RSOC value.
4. Performance and Characteristics
4.1 Test conditions and instruments
4.1.1 Temperature and Humidity
Unless otherwise specified, the measurement is executed at a temperature of 25 ± 3 °C
and at a relative humidity of 65±20%RH.
4.1.2 Initial Test
Initial test is started within 7 days after delivery.