Use and Care Manual

6 English
face shield while spraying. (Safety
Glasses do not provide full
protection)
This unit has been designed for use
with cleaning detergents
recommended by the manufacturer.
The use of other cleaning
detergents may affect the operation
of the machine and void the war-
ranty.
Gun kicks back – Hold with both
hands.
● The trigger gun safety lock prevents
the trigger from accidentally being
engaged. This safety feature must
be engaged when replacing nozzles
or not in use.
● This safety feature DOES NOT lock
spray in the ON position.
● Do not spray electrical connections,
electrical outlets or fixtures.
● Do not use with flammable liquids
and toxic chemicals.
● High-pressure. Keep clear of nozzle.
● Injection hazard: Equipment can
cause serious injury if the spray
penetrates the skin. Do not point the
gun at anyone or any part of the
body. In case of penetration seek
medical aid immediately.
● This system is capable of producing
1500 psi. To avoid rupture and injury,
do not operate this pump with
components rated less than 1500 psi
working pressure (including but not
limited to spray guns, hose and hose
connections).
● Before servicing, cleaning or
removing any parts, shut off power
and relieve pressure.
● Use only manufacturer approved
spare parts.
● Do not use the machine if the power
cord or important parts of the
machine are damaged, e.g. safety
devices, high-pressure hoses, trigger
gun.
● If the power cord is damaged, it must
be replaced by the manufacturer or a
authorized service agent.
● A damaged high pressure hose must
be replaced immediately.
● Only use manufacturer
recommended hoses and
connections.
● If connection is made to a potable
water system, the system shall be
protected against back flow.
When connecting the water inlet to
the water supply mains, local
regulations of your water company
must be observed. In some areas
the unit must not be connected
directly to the public drinking water
supply. This is to ensure that there
is no feedback of chemicals into
the water supply. Direct connection
via a receiver tank or back flow
Water Supply
(Cold Water Only)