Use and Care Manual

8 English
Failure to fit the filter will void the
warranty.
1. Connect the High Pressure Hose to
the Outlet Port on front.
2. Thread the other end of the high
pressure hose onto the spray gun
inlet.
3. Insert the spray wand into the spray
gun. Press it against the spring
tension and twist into the locked
position.
4. Connect the water supply hose to the
inlet connector on back.
5. Connect the garden hose to the cold
water source and turn the water
completely on.
6. Plug the Ground Fault Circuit
Interrupter (GFCI) into a working
Operating Instructions