SAFETY DATA SHEET Revision Date 04-01-23 Version 1 1. Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Product name Product code ArmorPoxy Epoxy Pool Paint - Part A OD-ARMPP-2GAL-2PHBE 1.2 Relevant identified uses of the substance or mixture and uses advised against Recommended Use Restrictions on use Paint Read label instructions and SDS 1.3 Details of the supplier of the safety data sheet Supplier ArmorPoxy Inc 1260 North Ave Plainfield, NJ 07062 1.
912232802 - ArmorPoxy High Build Epoxy - Part A Revision Date 04-01-2023 _____________________________________________________________________________________________ Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Wear protective gloves/protective clothing/eye protection/face protection Wash face, hands and any exposed skin thoroughly after handling Contaminated work clothing must not be allowed out of
912232802 - ArmorPoxy High Build Epoxy - Part A Revision Date 04-01-2023 _____________________________________________________________________________________________ Ethylbenzene Calcium carbonate (Limestone) 100-41-4 1317-65-3 1-5 1-5 The exact percentage (concentration) of composition has been withheld as a trade secret. 4. First aid measures 4.1 Description of first-aid measures General advice For further assistance, contact your local Poison Control Center.
912232802 - ArmorPoxy High Build Epoxy - Part A Revision Date 04-01-2023 _____________________________________________________________________________________________ 6. Accidental Release Measures 6.1 Personal precautions, protective equipment and emergency procedures Avoid contact with skin, eyes and clothing. Ensure adequate ventilation. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Stop leak if you can do it without risk.
912232802 - ArmorPoxy High Build Epoxy - Part A Revision Date 04-01-2023 _____________________________________________________________________________________________ Titanium dioxide 13463-67-7 Xylene 1330-20-7 respirable fraction TWA: 10 mg/m3 STEL: 150 ppm TWA: 100 ppm TWA: 15 mg/m3 total dust TWA: 100 ppm TWA: 435 mg/m3 TWA: 10 mg/m3 TWA: 3 mg/m3 TWA: 100 ppm STEL: 150 ppm Methyl isobutyl ketone 108-10-1 STEL: 75 ppm TWA: 20 ppm TWA: 100 ppm TWA: 410 mg/m3 TWA: 20 ppm STEL: 75 ppm Ethylbenzene
912232802 - ArmorPoxy High Build Epoxy - Part A Revision Date 04-01-2023 9. Physical and chemical properties 9.
912232802 - ArmorPoxy High Build Epoxy - Part A Revision Date 04-01-2023 _____________________________________________________________________________________________ 11. Toxicological information 11.1 Acute toxicity Numerical measures of toxicity: Product Information The following values are calculated based on chapter 3.1 of the GHS document Unknown Acute Toxicity Oral LD50 Dermal LD50 LC50 (Vapor) < 1% of the mixture consists of ingredient(s) of unknown toxicity 10,822.00 mg/kg 27,077.00 mg/kg 76.
912232802 - ArmorPoxy High Build Epoxy - Part A Revision Date 04-01-2023 _____________________________________________________________________________________________ • Contains a known or suspected carcinogen Chemical Name Titanium dioxide 13463-67-7 Methyl isobutyl ketone 108-10-1 Ethylbenzene 100-41-4 ACGIH - IARC Group 2B NTP - - Group 2B - - Group 2B - OSHA Reproductive toxicity Product Information • No information available Component Information • No information available STOT - single ex
12232802 - ArmorPoxy High Build Epoxy - Part A Revision Date 04-01-2023 _____________________________________________________________________________________________ Methyl isobutyl ketone 108-10-1 Ethylbenzene 100-41-4 Lepomis macrochirus 7.711 - 9.591 mg/L static EC50: 96 h Pseudokirchneriella LC50: 96 h Pimephales promelas subcapitata 400 mg/L 496 - 514 mg/L flow-through EC50: 72 h Pseudokirchneriella LC50: 96 h Oncorhynchus mykiss subcapitata 4.6 mg/L EC50: 96 h 11.0 - 18.
912232802 - ArmorPoxy High Build Epoxy - Part A Revision Date 04-01-2023 _____________________________________________________________________________________________ TSCA DSL EINECS/ELINCS ENCS IECSC KECL PICCS AICS NZIoC Complies Complies - TSCA - United States Toxic Substances Control Act Section 8(b) Inventory DSL - Canadian Domestic Substances List EINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances PICCS - Philippines Inventory of Chemic
912232802 - ArmorPoxy High Build Epoxy - Part A Revision Date 04-01-2023 _____________________________________________________________________________________________ International Air Transport Association (IATA) International Maritime Dangerous Goods (IMDG) NIOSH (National Institute for Occupational Safety and Health) NTP (National Toxicology Program) OSHA (Occupational Safety and Health Administration of the US Department of Labor) PEL (Permissible Exposure Limit) Reportable Quantity (RQ) Skin designat
SAFETY DATA SHEET Revision Date 04-01-23 Version 1 1. Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Product name Product code ArmorPoxy Hi-Build Immersion Activator - Part B OD-ARMPP-2GAL-2PHBE 1.2 Relevant identified uses of the substance or mixture and uses advised against Recommended Use Restrictions on use Paint/Paint Related Material No information available 1.
ArmorPoxy High Build Epoxy - Part B _____________________________________________________________________________________________ Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Wear protective gloves/protective clothing/eye protection/face protection Wash face, hands and any exposed skin thoroughly after handling Contaminated work clothing must not be allowed out of the workplace Do not breathe dust/fume
ArmorPoxy High Build Epoxy - Part B _____________________________________________________________________________________________ Toluene 108-88-3 <1 The exact percentage (concentration) of composition has been withheld as a trade secret. 4. First aid measures 4.1 Description of first-aid measures General advice Show this safety data sheet to the doctor in attendance. When symptoms persist or in all cases of doubt seek medical advice. Eye contact Immediately flush with plenty of water.
ArmorPoxy High Build Epoxy - Part B _____________________________________________________________________________________________ 6. Accidental Release Measures 6.1 Personal precautions, protective equipment and emergency procedures Stop leak if you can do it without risk. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Ensure adequate ventilation, especially in confined areas. Take precautionary measures against static discharges.
ArmorPoxy High Build Epoxy - Part B _____________________________________________________________________________________________ Ethylbenzene 100-41-4 TWA: 20 ppm TWA: 100 ppm TWA: 435 mg/m3 TRIETHYLENETETRA MINE 112-24-3 Toluene 108-88-3 - - TWA: 20 ppm TWA: 200 ppm Ceiling: 300 ppm TWA: 20 ppm TWA: 20 ppm Adverse reproductive effect TWA: 100 ppm TWA: 434 mg/m3 STEL: 125 ppm STEL: 543 mg/m3 TWA: 50 ppm TWA: 188 mg/m3 Skin TWA: 100 ppm TWA: 434 mg/m3 STEL: 125 ppm STEL: 543 mg/m3 TWA: 50 ppm
ArmorPoxy High Build Epoxy - Part B 9. Physical and chemical properties 9.
ArmorPoxy High Build Epoxy - Part B _____________________________________________________________________________________________ 11. Toxicological information 11.1 Acute toxicity Numerical measures of toxicity: Product Information The following values are calculated based on chapter 3.1 of the GHS document Unknown Acute Toxicity Oral LD50 Dermal LD50 LC50 (Vapor) 21.6527% of the mixture consists of ingredient(s) of unknown toxicity 5,835.00 mg/kg 16,113.00 mg/kg 59.
ArmorPoxy High Build Epoxy - Part B _____________________________________________________________________________________________ Ethylbenzene 100-41-4 - Group 2B - Reproductive toxicity Product Information • No information available Component Information • No information available STOT - single exposure No information available STOT - repeated exposure • No information available Other adverse effects Product Information • No information available Component Information • No information available Aspira
ArmorPoxy High Build Epoxy - Part B _____________________________________________________________________________________________ 100-41-4 TRIETHYLENETETRAMINE 112-24-3 Toluene 108-88-3 subcapitata 4.6 mg/L EC50: 96 h Pseudokirchneriella subcapitata 438 mg/L EC50: 72 h Pseudokirchneriella subcapitata 2.6 - 11.3 mg/L static EC50: 96 h Pseudokirchneriella subcapitata 1.7 - 7.6 mg/L static 11.0 - 18.0 mg/L static LC50: 96 h 2.4 mg/L Oncorhynchus mykiss 4.
ArmorPoxy High Build Epoxy - Part B _____________________________________________________________________________________________ 14. Transport Information Note ORM-D Limited quantity DOT UN/ID No Proper shipping name Hazard class Packing Group Quarts and gallons ship as limited quantity. UN1263 Paint 3 III MEX no data available IMDG Proper shipping name UN1263, Paint, 3, PG III IATA Proper shipping name UN1263, Paint, 3, PG III 15. Regulatory information 15.
ArmorPoxy High Build Epoxy - Part B _____________________________________________________________________________________________ 15.4 U.S. State Regulations California Proposition 65 This product contains the following Proposition 65 chemicals: Chemical Name Ethylbenzene - 100-41-4 Toluene - 108-88-3 California Prop. 65 Carcinogen Developmental Female Reproductive 16.
