Warranty Guide

Warranty Conditions
All ceiling products must be installed and maintained in accordance with the Armstrong World Industries written installation instructions for that product in
effect at the time of installation. This warranty is not transferable and applies to the original purchaser only.
Prior to installation, the ceiling product must be kept clean and dry in an environment that is between 32° F (0°C) and 86°F (30°C) and not subject to
Abnormal Conditions. Abnormal Conditions include exposure to chemical fumes, corrosive agents (such as chlorine), vibrations, fi re, and water, freezing
temperatures, accident or any other form of abuse, or excessive dirt or dust buildup. If subject to Abnormal Conditions, where possible, the products
should be removed immediately and replaced once the conditions are normal.
Installation of the products shall be carried out where the temperature is between 32°F (0°C) and 86°F (30°C). It is necessary for the area to be enclosed
and for HVAC systems to be functioning and in continuous operation. All wet work (plastering, concrete, etc.) must be complete and dry, and the products
must be protected from the elements such as rain, snow, etc. These temperature and humidity conditions must be met throughout the life of the warranty.
This limited warranty is subject to further conditions listed below.
The warranty is void if the ceiling product is not installed in accordance with the installation instructions included in every carton, also available at
ceilings.com.
RC-3631-317