Warranty Guide

Installation of the products shall be carried out
where the temperature is between 32°F (0°C) and
120°F (49°C). It is not necessary for the area to be
enclosed and for HVAC systems to be functioning
and in continuous operation. All wet work (plastering,
concrete, etc.) must be complete and dry, and the
products must be protected from the elements such
as rain, snow, etc. These systems cannot be used
in exterior applications. These temperature and
humidity conditions must be met throughout the life
of the warranty.
Sag Resistance
Armstrong
®
Custom Creations and Metallaire
™
Ceiling products are sag resistance. They are
warranted to be free from defect in materials or
factory workmanship or sagging and warping as a
result thereof for as long as you own your home.
Mold and Mildew Resistance
Armstrong Custom Creations and Metallaire
™
Ceiling
products are warranted to be free from the growth of
mold, mildew and gram positive and gram negative
odor and stain causing bacteria due to the inherent
characteristics of the products for as long as you
own your home.
This limited warranty is subject to further conditions
listed below.
The warranty is void if the ceiling product is
not installed in accordance with the installation
instructions included in every carton, and also
available at www.armstrong.com
Residential Ceiling Panel Ten-Thirty (10/30)
Year Limited Warranty
Ceiling Products Covered by this Limited Warranty:
*1201 Raised Panel,
™
*1203 Fluted, 1202 Scalloped,
*1205 Single Raised Panel, *1206 Tango, 46
Wellington,
™
1240 TinTile,
™
1244 Circles,
231 Plain White, 250 Pinehurst,
™
258 Grenoble,
™
480 Country Classic
™
Plank, 1134 Impression,
®
1693 Sahara,
™
and 8008 TinCraft
™
Circles.
The Armstrong Ceiling products listed above are
warranted to be free from defects in materials or
factory workmanship for 10 years from the date of
installation when used under normal conditions.
(Except for obvious defects in materials or factory
workmanship, which Armstrong must be notifi ed of
within 30 days of the date of installation.)
*Homestyle
®
Ceiling panels are warranted to be free
from the growth of mold, mildew, and gram positive
and gram negative odor and stain causing bacteria
for ten (10) years from the date of installation.
Homestyle Ceiling panels contain a mold inhibiting
agent that provides broad spectrum control for the
growth of mold and mildew over the warranty period.
These ceiling panels also resist the growth of gram
positive and gram negative odor and stain causing
bacteria.
This limited warranty is subject to further conditions
listed below.
Thirty (30) Year System Limited Warranty
HomeStyle direct apply ceilings installed with
Armstrong Easy Up suspension systems are
warranted to stay in place for 30 years. This limited
warranty applies to the system when installed
in accordance with installation instructions. This
warranty applies to the following direct apply items;
46 Wellington, 1240 TinTile,
™
1244 Circles,
231 Plain White, 250 Pinehurst,
™
258 Grenoble,
™
480 Country Classic
™
Plank, 1134 Impression,
®
and 1693 Sahara.
™
Warranty Conditions
All ceiling products must be installed and maintained
in accordance with Armstrong’s written installation
instructions for that product in effect at the time
of installation. This warranty is not transferable
and applies to the original purchaser only. Prior to
installation, the ceiling product must be kept clean
and dry in an environment that is between 32°F
(0°C) and 86°F (30°C) and not subject to Abnormal
Conditions.
Abnormal Conditions include exposure to chemical
fumes, corrosive agents (such as chlorine),
vibrations, fi re, and water, freezing temperatures,
accident or any other form of abuse, or excessive
dirt or dust buildup. If subject to Abnormal
Conditions, where possible, the products should
be removed immediately and replaced once the
conditions are normal.
Installation of the products shall be carried out where
the temperature is between 32°F (0°C) and 86°F
(30°C). It is necessary for the area to be enclosed
and for HVAC systems to be functioning and in
continuous operation. All wet work (plastering,
concrete, etc.) must be complete and dry, and the
products must be protected from the elements such
as rain, snow, etc. These temperature and humidity
conditions must be met throughout the life of the
warranty.
This limited warranty is subject to further conditions
listed below.
The warranty is void if the ceiling product is
not installed in accordance with the installation
instructions included in every carton, also available at
www.armstrong.com
WoodHaven
™
Ceiling Panel Ten (10) Year
Limited Warranty
Armstrong’s WoodHaven Ceiling products are
warranted to be free from defects in materials or
factory workmanship for 10 years from the date of
installation when used under normal conditions.
(Except for obvious defects in materials or factory
workmanship, which Armstrong must be notifi ed of
within 30 days of the date of installation.)
Warranty Conditions
All WoodHaven products must be installed and
maintained in accordance with Armstrong’s written
installation instructions in effect at the time of
installation.
This warranty is not transferable and applies to the
original purchaser only.
Prior to installation, the ceiling product must be kept
clean and dry in an environment that is between
50° F (10°C) and 86°F (30°C) and not subject to
Abnormal Conditions. Abnormal Conditions include
exposure to chemical fumes, corrosive agents (such
as chlorine), vibrations, fi re, and water, freezing
temperatures, accident or any other form of abuse,
or excessive dirt or dust buildup. If subject to
Abnormal Conditions, where possible, the products
should be removed immediately and replaced once
the conditions are normal.
Installation of the products shall be carried out
where the temperature is between 50°F (10°C) and
86°F (30°C) and relative humidity levels maintained
between 25%RH and 55% RH. It is necessary for
the area to be enclosed and for HVAC systems to be
functioning and in continuous operation. All wet work
(plastering, concrete, etc.) must be complete and
dry, and the products must be protected from the
elements such as rain, snow, etc. These temperature
and humidity conditions must be met throughout the
life of the warranty.
This limited warranty is subject to further conditions
listed below.
The warranty is void if the ceiling product is
not installed in accordance with the installation
instructions included in every carton, also available at
www.armstrong.com
Residential Mineral Fiber Ceiling Panel One
(1) Year Limited Warranty
Please read all of the following terms carefully as this
warranty may be affected by installation methods
and materials used and site conditions. Armstrong
does not authorize any person to assume or extend
any other warranty obligation or liability on its behalf.
Ceiling Products Covered by this Limited Warranty:
933 Random Textured, 934 Random Textured,
935 Random Textured, 942, Textured, 949 Textured,
280 Plain White, 915 Textured Fire Guard,
™
9767
Scored, 1135 Impressions,
™
296 Oasis, 266
Brighton,
™
297 Grenoble, and 1270 Cascade.
The Armstrong Ceiling products listed above are
warranted to be free from defects in materials or
factory workmanship for 1 year from the date of
installation when used under normal conditions.
(Except for obvious defects in materials or factory
workmanship, which Armstrong must be notifi ed of
within 30 days of the date of installation.)
Warranty Conditions
All ceiling products must be installed and maintained
in accordance with Armstrong’s written installation
instructions for that product in effect at the time of
installation. This warranty is not transferable and
applies to the original purchaser only.
Prior to installation, the ceiling product must be kept
clean and dry in an environment that is between
32° F (0°C) and 86°F (30°C) and not subject to
Abnormal Conditions. Abnormal Conditions include
exposure to chemical fumes, corrosive agents (such
as chlorine), vibrations, fi re, and water, freezing
temperatures, accident or any other form of abuse,
or excessive dirt or dust buildup. If subject to
Abnormal Conditions, where possible, the products
should be removed immediately and replaced once
the conditions are normal.
Installation of the products shall be carried out where
the temperature is between 32°F (0°C) and 86°F
(30°C). It is necessary for the area to be enclosed
and for HVAC systems to be functioning and in
continuous operation. All wet work (plastering,
concrete, etc.) must be complete and dry, and the
products must be protected from the elements such
as rain, snow, etc. These temperature and humidity
conditions must be met throughout the life of the
warranty.
This limited warranty is subject to further conditions
listed below.
The warranty is void if the ceiling product is
not installed in accordance with the installation
instructions included in every carton, also available at
www.armstrong.com
Suspended Ceiling Installation Systems—
10-Year Limited Warranty
Armstrong Suspension Systems are warranted to be
free from defects in materials or factory workmanship
and are also warranted against the occurrence of
50% red rust as designated by ASTM D610 test
procedures for a period of 10 years from the date of
installation (except for obvious defects in materials or
factory workmanship, of which Armstrong must be
notifi ed within 30 days of the date of shipment to the
customer). This limited warranty is subject to further
conditions as indicated.
armstrong.com 2