Warranty

Precautions

■

Flooring should be rolled face out until ready to install and acclimated to

the room.

■

Accurately measure the length and width of room. Include recessed

areas and doorways.

■

Plan layout for minimum number of seams.

■

If more than one piece of flooring is needed, allow for correct pattern

match at seam.

■

Allow an extra 1 to 1-1/2 inches of flooring on each end for trimming.

■

Cut floor 3/16˝ away from all vertical surfaces.

■ Acrylic Double-face Tape must be used at seams where needed, at door-

ways and other areas with heavy moveable appliances.

Do not use tape around perimeter of room.

■

Use

Acrylic Double-face Tape

in areas where the flooring meets tubs,

shower stalls or toilets. Seal with silicone caulk.

■

Do not overlap installation tape.

■

Tape should be placed in the form of large “Xs” (without overlapping)

underneath moveable appliances.

■

Undercut decorative trim and jamb moldings at doorways.

■

Do not install over particleboard subfloors.

■

Do not install on stairs or under cabinets.

■

NOTE: Use caution moving heavy appliances!

Customer Relations & Technical Services:

1 800 233 3823

www.armstrong.com

All trademarks are owned by AWI Licensing Company.