Warranty

Warranty owner
This warranty extends only to the original end user and is not transferable.
Care and maintenance
Proper care and maintenance will help ensure your floor always looks
its best. Simply follow our maintenance and prevention steps
outlined below.
Immediately after Installation
● Protect the sealed seams on your flooring per the installation instructions.
This will ensure proper seam bond. If your seams are disturbed before
they’re dry, permanent damage may result.
● Maintain room temperature at 65° F (18° C) for 48 hours after
installation is completed. This assures proper curing, setting
and bonding of products.
● If your floor has been installed with the full-spread installation method,
then the adhesive under your floor needs time to thoroughly dry after
installation. Therefore, we recommend that you do not scrub or wash
your floor for five days.
Caring for your floor
● Sweep or vacuum regularly to remove loose dirt, which can scratch your
floor. NOTE: We do not recommend vacuums that have a beater bar as
it can visibly damage your flooring surface. Additionally, we do not
recommend electric brooms with hard plastic bottoms with no padding
as use may result in discoloration and deglossing.
● Never use highly abrasive scrubbing tools on any Armstrong floor.
● Wipe up spills as soon as possible. Remove dried spills with Armstrong
New Beginning
®
Resilient Deep Cleaning Floor Stripper* on a clean white
cloth and rinse. See stain chart for instructions on removing specific stains.
● Wash your floor regularly with Armstrong Once 'n Done
®
Resilient &
Ceramic Floor Cleaner.*
● For heavy duty cleaning, use Armstrong New Beginning
®
Resilient Deep
Cleaning Floor Stripper.*
● Do NOT use detergents, abrasive cleaners, or “mop and shine”
products. These products may leave a dull film on your floor.
● Over time, if the shine on your floor begins to dull, Armstrong
Shinekeeper
®
Resilient High Gloss Floor Finish can be used to renew your
floor's shine. Do NOT use paste wax or solvent-based polishes.
● Vinyl flooring, like other types of smooth floors, can become slippery
when wet. Allow time for floor to dry after washing. Immediately wipe
up wet areas from spills, foreign substances, or wet feet.
* : Eye and skin irritant.
Proactive protection for your floor
● When moving appliances or heavy furniture, lay a plywood panel on your
floor and “walk” the item across it. This protects your floor from scuffing
and tears. Never slide furniture or appliances directly over your floor.
● Use floor protectors, such as Armstrong Floor Protectors, on furniture to
reduce indentation. The heavier the item, the wider the floor
protector needed.
● Do not use rolling casters. They can damage the floor.
● Place a walk-off mat at outside entrances to reduce the amount of dirt
brought into your home. We strongly recommend mats without a latex
or rubber backing since these backings can cause permanent
discoloration.
● All Armstrong floor care products have been specifically developed to
care for Armstrong floors. You may purchase Armstrong floor care
products at your local flooring retailer.