Warranty
Precautions
■
Flooring should be rolled face out until ready to install and acclimated to
the room.
■
Accurately measure the length and width of room. Include recessed
areas and doorways.
■
Plan layout for minimum number of seams.
■
If more than one piece of flooring is needed, allow for correct pattern
match at seam.
■
Allow an extra 1 to 1-1/2 inches of flooring on each end for trimming.
■
Cut floor 3/16˝ away from all vertical surfaces.
■ Acrylic Double-face Tape must be used at seams where needed, at door-
ways and other areas with heavy moveable appliances.
Do not use tape around perimeter of room.
■
Use
Acrylic Double-face Tape
in areas where the flooring meets tubs,
shower stalls or toilets. Seal with silicone caulk.
■
Do not overlap installation tape.
■
Tape should be placed in the form of large “Xs” (without overlapping)
underneath moveable appliances.
■
Undercut decorative trim and jamb moldings at doorways.
■
Do not install over particleboard subfloors.
■
Do not install on stairs or under cabinets.
■
NOTE: Use caution moving heavy appliances!
Customer Relations & Technical Services:
1 800 233 3823
www.armstrong.com
© 2012 AWI Licensing Company Printed in United States of America
All trademarks are owned by AWI Licensing Company.