Warranty

If installing a new plywood subfloor, use APA Underlayment
Grade. For new or existing plywood subfloors, check for
loose panels, gapped joints, knots, nail holes, or other
damage.
Must be clean, dry, and dust-free. Check for cracks, scaling, levelness, and
other damage. If installing over ceramic tile, terrazzo, or marble, ensure that
the tiles are firmly bonded.
PLYWOOD
Use smooth edge trowel
for applying S-184
Use medium grit sandpaper and
sanding block for smoothing rough
areas of the underlayment
CONCRETE/CERAMIC
Use smooth edge trowel
for applying S-184
Use medium grit sandpaper and
sanding block for smoothing rough
areas of the underlayment
S-184 Patch & Skim Coat, for patching
or filling uneven areas or areas that are
not smooth
S-184 Patch & Skim Coat, for patching
or filling uneven areas or areas that are
not smooth
PREPARE
PREPARE
Room preparation and procedure
Step 3.
● No-Glue Vinyl Sheet is designed for modified loose lay installation using
Acrylic Double-face Tape.
● The tape must be used under seams where needed, at doorways and other
selected areas with heavy movable appliances. Do not use the tape
around the entire perimeter of the room.
NOTE: No-Glue Vinyl Sheet’s unique structure allows the product to be
installed by the simplified modified loose lay with tape method. It will span minor
subfloor irregularities and tends to hide seasonal changes that can sometimes
occur and become visible at underlayment joints. Depending on the wood
subfloor/underlayment construction and the degree of moisture condition
changes in the home environment, No-Glue Vinyl Sheet can, under severe