Instruction manual

HOW TO USE
Before First Use:
1. Read all instructions and important safeguards.
2. Remove all packaging materials; make sure all items are received in good
condition. Tear up all plastic bags as they can pose a risk to children.
3. Fill kettle up to the MAX WATER MARK and bring to a boil. It is
recommended that you fill, boil, and empty the kettle at least 4 times to clear
the kettle of any tiny particles and to give the rubber seals a chance to settle.
4. Wipe body clean with a damp cloth.
To Operate Water Kettle:
1. Place the water kettle upright on a dry, sturdy and flat surface.
2. Open the lid and snap filter into place between the two grooves near the
spout at the front of the kettle. Fill the kettle with the desired level of water,
making sure that the water level meets the minimum and does not exceed
the maximum level in kettle. The kettle can be filled either by opening the lid
and or by filling through the spout. Please see figure 1.1 on page five.. If
you live in an area with hard water, it is recommended that you use purified
water to reduce the amount of scale build-up in the kettle.
3. Close the lid and place kettle securely onto the base. Plug into electrical
outlet and switch the kettle to the “On” position. The power indicator light
will illuminate, showing that the kettle is heating up. When the water has
boiled, the kettle will shut off automatically. You may also shut the kettle off
at any time by moving the “on/off” switch to the off position. After the kettle
has finished boiling, wait a few minutes for the kettle to cool before boiling
again.
CAUTION:
• Do not plug in and turn on product when it does NOT contain water.
• Never open the lid of kettle while it is in use.
• Always turn off the kettle and unplug it from the electrical outlet
when not in use.
•
Do NOT leave an operating appliance unattended for long periods
of time.
4